1984/07/16 Caterpillar


New Mechanical Service Meter Used{7478}

Usage:


3400 And 3500 Series Industrial, Marine And Generator Set Engines Equipped With A 9S8722 Service Meter

Description of Change: New mechanical service meters are used in the above engines. The internal components in the new service meters have better protection from corrosion than those in the former service meter.

Adaptable As: The new 4W5556 Meter Group is a direct replacement for the former 9S8722 Meter Group, which is canceled.

Caterpillar Information System:

1984/07/16 Use Caution When Handling Components That Contain Asbestos{0353}
1984/07/16 Alternator Available For General Use{1405}
1984/07/16 New Relief Valve Guide Used In Oil Pump{1315}
1984/07/16 A New Baffle Plate And Oil Pump Drive Sleeve Are Used In Marine Transmissions{3310}
1984/07/16 Make Sure Crankshaft Is Installed Correctly{1202}
1984/07/09 New Disassembly And Assembly Tools Available For Fuel Ratio Controls{0600,1278}
1984/07/02 Surface Grinding Of Compacted Graphite Iron Cylinder Heads{1101}
1984/07/02 New Crankshaft, Cylinder Block And Camshaft Used{1202,1201,1210}
1984/07/02 Modification To FT1488 Exciter Tester Group Allows Testing Of All Small Frame SR4 Generators{0785,4450,4467}
1984/07/02 Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1984/06/25 New Rear Crankshaft Seal Group Used {1161}
1984/06/25 New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets {1100,1101}
1984/07/16 FT1886 Valve Spring Compressor Group Available{0600,1108}
1984/07/16 Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0768,1361}
1984/07/16 Installation Instructions For Turbocharger Bearing Kit{1052,1053}
1984/08/13 Higher Compression Pistons Can Help Reduce White Exhaust Smoke During Cold Weather Starts{1250}
1984/08/13 New Service Tools Available{0600}
1984/08/13 New Films (Decals) Available For Service Meter Face{7478,7480}
1984/08/13 New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/20 Instrument Panels Improved{7450}
1984/08/20 New Thermistor Thermometer Group Can Be Ordered At Less Cost{0651,0653,0650}
1984/08/20 Two New High Speed Marine Transmissions Can Be Used With 3500 Series Engines{3302,3306,3351}
1984/09/03 Correct Removal And Installation Of Double-Walled Fuel Injection Lines Help Prevent Fuel Leakage{1252}
1984/09/03 New Inlet Valve Used{1105}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.