1984/07/16 Caterpillar


New Relief Valve Guide Used In Oil Pump{1315}

Usage:


All 3208 Engines

Description of Change: A new relief valve guide is used in the oil pump group on 3208 Engines. The new relief valve guide is the same hardness as the plunger and has a different hole pattern than the former relief valve guide.

The former relief valve guide has in some applications, worn a step in the guide. This step can limit the movement of the relief valve plunger and possibly cause high oil pressure.

Adaptable As: The new 7W239 Relief Valve Guide is a direct replacement for the former 2W4110 or 1W1789 Relief Valve Guides. The new valve guide is in effect as shown in the chart.

Caterpillar Information System:

1984/07/16 A New Baffle Plate And Oil Pump Drive Sleeve Are Used In Marine Transmissions{3310}
1984/07/16 Make Sure Crankshaft Is Installed Correctly{1202}
1984/07/09 New Disassembly And Assembly Tools Available For Fuel Ratio Controls{0600,1278}
1984/07/02 Surface Grinding Of Compacted Graphite Iron Cylinder Heads{1101}
1984/07/02 New Crankshaft, Cylinder Block And Camshaft Used{1202,1201,1210}
1984/07/02 Modification To FT1488 Exciter Tester Group Allows Testing Of All Small Frame SR4 Generators{0785,4450,4467}
1984/07/02 Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1984/06/25 New Rear Crankshaft Seal Group Used {1161}
1984/06/25 New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets {1100,1101}
1984/06/25 Oil Recommendations For Power Shift Transmissions {3179}
1984/06/25 MG507 Marine Transmission Uses Metric Fasteners {3354}
1984/06/25 New Ammeter And Ammeter Calibrator Group Available {0651}
1984/07/16 Alternator Available For General Use{1405}
1984/07/16 Use Caution When Handling Components That Contain Asbestos{0353}
1984/07/16 New Mechanical Service Meter Used{7478}
1984/07/16 FT1886 Valve Spring Compressor Group Available{0600,1108}
1984/07/16 Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0768,1361}
1984/07/16 Installation Instructions For Turbocharger Bearing Kit{1052,1053}
1984/08/13 Higher Compression Pistons Can Help Reduce White Exhaust Smoke During Cold Weather Starts{1250}
1984/08/13 New Service Tools Available{0600}
1984/08/13 New Films (Decals) Available For Service Meter Face{7478,7480}
1984/08/13 New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/20 Instrument Panels Improved{7450}
1984/08/20 New Thermistor Thermometer Group Can Be Ordered At Less Cost{0651,0653,0650}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.