Modification To FT1488 Exciter Tester Group Allows Testing Of All Small Frame SR4 Generators{0785,4450,4467}
Usage:
Formerly the FT1488 Exciter Tester Group could not be used to test SR4 generators equipped with a 4W5271 Regulator Assembly. The drawings for the FT1488 Exciter Tester Group have been changed so that the exciter tester can be used to test all small frame SR4 generators used with 3200, 3300 and 3400 Series Engines.
Modification of existing FT1488 Exciter Tester Groups is simple and requires the addition of one transformer.
Dealers in the U.S.A. and Caterpillar Americas can order drawings of Fabricated Tools (FT) from the address that follows. All other dealers can order drawings from their Subsidiary Service Departments.
Service G.O. Print Room
Pioneer Park
600 W. Washington Street
East Peoria, IL 61630
Phone: 309-675-0515
Caterpillar Information System:
1984/07/02 Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1984/06/25 New Rear Crankshaft Seal Group Used {1161}
1984/06/25 New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets {1100,1101}
1984/06/25 Oil Recommendations For Power Shift Transmissions {3179}
1984/06/25 MG507 Marine Transmission Uses Metric Fasteners {3354}
1984/06/25 New Ammeter And Ammeter Calibrator Group Available {0651}
1984/06/25 Copper Seals Available For JIC (Joint Industry Conference) Fittings {0600,0683,0684}
1984/06/11 Valve Springs Must Be Removed Before Fuel Injection Nozzle Adapter Assembly Is Removed{1106}
1984/06/11 Oil Temperature Gauges Must Be Used With The Correct Senders{7488,7489}
1984/06/11 Higher Gloss Paint Used On Caterpillar Products{7559,0374}
1984/06/11 Changes Made To Air Shutoff And Rack Shutoff Groups{1078,7418}
1984/06/11 New Air Start And Override Valve Has Stronger Mounting{1451}
1984/07/02 New Crankshaft, Cylinder Block And Camshaft Used{1202,1201,1210}
1984/07/02 Surface Grinding Of Compacted Graphite Iron Cylinder Heads{1101}
1984/07/09 New Disassembly And Assembly Tools Available For Fuel Ratio Controls{0600,1278}
1984/07/16 Make Sure Crankshaft Is Installed Correctly{1202}
1984/07/16 A New Baffle Plate And Oil Pump Drive Sleeve Are Used In Marine Transmissions{3310}
1984/07/16 New Relief Valve Guide Used In Oil Pump{1315}
1984/07/16 Alternator Available For General Use{1405}
1984/07/16 Use Caution When Handling Components That Contain Asbestos{0353}
1984/07/16 New Mechanical Service Meter Used{7478}
1984/07/16 FT1886 Valve Spring Compressor Group Available{0600,1108}
1984/07/16 Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0768,1361}
1984/07/16 Installation Instructions For Turbocharger Bearing Kit{1052,1053}