Inlet Manifold
Show/hide table
| |
| Illustration 1 | g01332108 |
|
Typical example | |
Tighten the setscrew in the sequence in illustration 1 to the following torque. ...
Caterpillar Information System:
C7.1 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor
C6.6 Engines for Caterpillar Built Machines Electronic Control Module
C7.1 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
C7.1 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C7.1 Engines for Caterpillar Built Machines Boost Pressure Sensor
3126B Petroleum Engine Aftercooler - Remove
3126B Petroleum Engine Camshaft - Install
Marine Multi-Station Control System PCP CID 1440 - FMI 03
Marine Multi-Station Control System PCP CID 1815 - FMI 12
Marine Multi-Station Control System PCP CID 1815 - FMI 13
Marine Multi-Station Control System PCP CID 1817 - FMI 09
2005/07/11 Improved Fuel/Water Separators are now Used {1260, 1261, 1263}
Engine Valve Failure Modes{1100, 1105} Engine Valve Failure Modes{1100, 1105}
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0001 FMI 07
C15 and C18 Petroleum Generator Sets Overspeed
3126B Petroleum Engine Aftercooler - Install
C18 Petroleum Generator Sets Cooling System Coolant Level - Check
3126B Petroleum Engine Engine Oil Pan - Remove and Install
C7 On-highway Engine Air Inlet and Exhaust System
Marine Multi-Station Control System PCP CID 0718 - FMI 07
Marine Multi-Station Control System PCP CID 0700 - FMI 02
C18 Generator Sets Radiator - Clean
C13 and C15 On-highway Engines Diesel Particulate Filter Has Differential Pressure Problem
C15-XQ400 Rental Generator Set Engine Speed/Timing Sensors - Check/Clean/Calibrate