Electronic Control Module
Show/hide table
| |
| Illustration 1 | g01332539 |
|
(1) Electronic control module (ECM)
(2) Setscrew (3) Fuel line connectors (4) Setscrew | |
(2) Setscrew
- Tighten the setscrew to the following torque. ...
5 N·m (44 lb in)
(4) Setscrew
- Tighten the setscrew to the following torque. ...
22 N·m (16 lb ft)
Caterpillar Information System:
C7.1 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
C7.1 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C7.1 Engines for Caterpillar Built Machines Boost Pressure Sensor
3126B Petroleum Engine Aftercooler - Remove
3126B Petroleum Engine Camshaft - Install
Marine Multi-Station Control System PCP CID 1440 - FMI 03
Marine Multi-Station Control System PCP CID 1815 - FMI 12
Marine Multi-Station Control System PCP CID 1815 - FMI 13
Marine Multi-Station Control System PCP CID 1817 - FMI 09
2005/07/11 Improved Fuel/Water Separators are now Used {1260, 1261, 1263}
3126B Petroleum Engine Camshaft - Remove
Marine Multi-Station Control System PCP CID 1821 - FMI 09
C7.1 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor
C7.1 Engines for Caterpillar Built Machines Inlet Manifold
Engine Valve Failure Modes{1100, 1105} Engine Valve Failure Modes{1100, 1105}
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0001 FMI 07
C15 and C18 Petroleum Generator Sets Overspeed
3126B Petroleum Engine Aftercooler - Install
C18 Petroleum Generator Sets Cooling System Coolant Level - Check
3126B Petroleum Engine Engine Oil Pan - Remove and Install
C7 On-highway Engine Air Inlet and Exhaust System
Marine Multi-Station Control System PCP CID 0718 - FMI 07
Marine Multi-Station Control System PCP CID 0700 - FMI 02
C18 Generator Sets Radiator - Clean