PCP CID 1815 - FMI 13
Conditions Which Generate This Code:
The PCP has detected an error in the configuration parameters.
Note: The PCP has set all configuration parameters to the default values.
Test Step 1. REPROGRAM THE CONFIGURATION PARAMETERS.
- Ensure that the keyswitch is ON.
- Reprogram the parameters for the PCP.
Expected Result:
The diagnostic code is not active.
Results:
- OK - The diagnostic code is not active.
STOP
- NOT OK - The diagnostic code is active. Reprogramming the PCP did not fix the problem.
Repair: Temporarily replace the PCP and retest.
STOP
Caterpillar Information System:
Marine Multi-Station Control System PCP CID 1817 - FMI 09
2005/07/11 Improved Fuel/Water Separators are now Used {1260, 1261, 1263}
3126B Petroleum Engine Camshaft - Remove
Marine Multi-Station Control System PCP CID 1821 - FMI 09
Marine Multi-Station Control System Active Station - Test
Marine Multi-Station Control System Control Panel - Test
Marine Multi-Station Control System Data Link (Marine Power Display) - Test
Marine Multi-Station Control System Gear Lockout - Test
Marine Multi-Station Control System Electrical Connector - Inspect
Marine Multi-Station Control System Glossary of Terms
Marine Multi-Station Control System Data Link
Marine Multi-Station Control System Slow Vessel Mode - Test
Marine Multi-Station Control System PCP CID 1815 - FMI 12
Marine Multi-Station Control System PCP CID 1440 - FMI 03
3126B Petroleum Engine Camshaft - Install
3126B Petroleum Engine Aftercooler - Remove
C7.1 Engines for Caterpillar Built Machines Boost Pressure Sensor
C7.1 Engines for Caterpillar Built Machines Coolant Temperature Sensor
C7.1 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
C6.6 Engines for Caterpillar Built Machines Electronic Control Module
C7.1 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor
C7.1 Engines for Caterpillar Built Machines Inlet Manifold
Engine Valve Failure Modes{1100, 1105} Engine Valve Failure Modes{1100, 1105}
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0001 FMI 07