Bail Cylinder and Mounting
169-7244 Bail Cylinder and Mounting Gp
Show/hide table
Illustration 1 | g01318157 |
(1) Torque for three bolts ... 700 ± 90 N·m (520 ± 65 lb ft)
167-7434 Bail Cylinder
Show/hide table
Illustration 2 | g01318147 |
(2A) Diameter of new piston ... 75.70 ± 0.03 mm (2.980 ± 0.001 inch)
(2B) Diameter of new rod ... 44.400 ± 0.038 mm (1.7480 ± 0.0015 inch)
(2C) Bore of new cylinder ... 76.20 ± 0.08 mm (3.000 ± 0.003 inch)
(2D) Bore of new head over four lands ... 44.78 ± 0.03 mm (1.763 ± 0.001 inch)
(2E) Lubricate the threads with clean grease prior to installation.
- Torque for head ... 600 ± 130 N·m (440 ± 95 lb ft)
(2F) Lubricate the sealing lip lightly with the lubricant that is being sealed.
(2G) Apply 4C-4032 Bearing Mount Compound to the wiper seal groove prior to installation.
Caterpillar Information System:
2002/10/28 Correction to Operation and Maintenance Manual , "Equipment Lowering with Engine Stopped" {7000}
C15 Petroleum Generator Set Engines Electric Starting Motor
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Test/Enable Switch
631G and 637G Wheel Tractor-Scrapers Hydraulic System Apron
2002/10/28 Examine Failed Starting Motors to Understand the Reason for Failure {1453}
631G and 637G Wheel Tractor-Scrapers Hydraulic System Apron
2002/10/28 Correction to Operation and Maintenance Manual , "Equipment Lowering with Engine Stopped" {7000}
Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070} Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070}
2002/10/28 New Friction Disc Improves The Service Life Of The Drive Shaft Group Components {3253}
637G Wheel Tractor-Scraper Wheel Scraper Power Train Radiator Module
D10R Track-Type Tractor Bulldozer - Lubricate
Test Sequence for Capsule Type Fuel Nozzles{0782} Test Sequence for Capsule Type Fuel Nozzles{0782}
3126B Machine Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
D10R Main Frame and Fender Crossbeam Pinned Mount Conversion{7050} D10R Main Frame and Fender Crossbeam Pinned Mount Conversion{7050}
D10R Track-Type Tractor Safety Messages
631G and 637G Wheel Tractor-Scrapers Hydraulic System Bail Cylinder
3054E Industrial Engine Flywheel - Remove
D10R Track-Type Tractor Cooling System Extended Life Coolant Extender - Add
D11R Track-Type Tractor Model Specific Coolant Information
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 02 Filtered Oil Pressure Sensor misinstalled
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 03 Filtered Oil Pressure Sensor shorted high
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 04 Filtered Oil Pressure Sensor shorted low
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 13 Filtered Oil Pressure Sensor out of calibration
2004/04/19 A New Hydraulic Oil Cooler is Now Available {1374}