Bulldozer - Lubricate
Lubricate the tilt cylinders and the tilt brace.
Show/hide table
Illustration 1 | g00759066 |
One grease fitting is located at the left front brace assembly or left tilt cylinder (if equipped).
Show/hide table
Illustration 2 | g00759073 |
The other grease fitting is located at the rod end of the right tilt cylinder.
Caterpillar Information System:
Test Sequence for Capsule Type Fuel Nozzles{0782} Test Sequence for Capsule Type Fuel Nozzles{0782}
3054E Industrial Engine Camshaft Bearings - Remove and Install
D10R Track-Type Tractor Alternator and Fan Belts - Inspect/Adjust/Replace
D10R Track-Type Tractor Air Conditioner Belt - Inspect/Adjust/Replace
D10R Track-Type Tractor Bulldozer Tilt Brace
631G and 637G Wheel Tractor-Scrapers Hydraulic System Control Valve (Push-Pull)
Rerouting the Return-to-Tank Fuel Line{1274} Rerouting the Return-to-Tank Fuel Line{1274}
631G Wheel Tractor-Scraper Capacities (Refill)
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Fuel System Pressure - Test
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Fuel System - Prime
3126B Machine Engines System Configuration Parameters
2014/02/26 A New Alternator Improves Durability {1405, 7168}
637G Wheel Tractor-Scraper Wheel Scraper Power Train Radiator Module
2002/10/28 New Friction Disc Improves The Service Life Of The Drive Shaft Group Components {3253}
Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070} Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070}
2002/10/28 Correction to Operation and Maintenance Manual , "Equipment Lowering with Engine Stopped" {7000}
631G and 637G Wheel Tractor-Scrapers Hydraulic System Apron
2002/10/28 Examine Failed Starting Motors to Understand the Reason for Failure {1453}
631G and 637G Wheel Tractor-Scrapers Hydraulic System Apron
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Test/Enable Switch
C15 Petroleum Generator Set Engines Electric Starting Motor
2002/10/28 Correction to Operation and Maintenance Manual , "Equipment Lowering with Engine Stopped" {7000}
631G and 637G Wheel Tractor-Scrapers Machine Systems Bail Cylinder and Mounting
3126B Machine Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test