2002/10/28 Caterpillar


New Friction Disc Improves The Service Life Of The Drive Shaft Group Components {3253}

Usage:

627F 1DL
Wheel Tractor-Scraper:
621F (S/N: 4SK1-UP)
623F (S/N: 6BK1-UP)
627F (S/N: 1DL1-UP)
Service Magazine SEPD0250, 10 April 1995, "New Friction Disc Improves The Service Life Of The Drive Shaft Group Components". Disregard this article. Refer to the following information.

Description of Change: A new friction disc is used in the drive shaft. The new friction disc will reduce tooth wear between the friction disc and the spider.

Adaptable To: The new 117-0019 Friction Disc is a direct replacement for the 6Y-7945 Friction Disc. The new friction disc is effective with the following machines:

  • 621F (S/N: 4SK120-UP)

  • 623F (S/N: 6BK106-UP)

  • 627F (S/N: 1DL96-UP)

Note: All new 117-0019 Friction Discs must be soaked in SAE10W oil for at least one hour prior to installation.




Illustration 1g00931676

(1) 117-0019 Friction Discs

Caterpillar Information System:

637G Wheel Tractor-Scraper Wheel Scraper Power Train Radiator Module
D10R Track-Type Tractor Bulldozer - Lubricate
Test Sequence for Capsule Type Fuel Nozzles{0782} Test Sequence for Capsule Type Fuel Nozzles{0782}
3054E Industrial Engine Camshaft Bearings - Remove and Install
D10R Track-Type Tractor Alternator and Fan Belts - Inspect/Adjust/Replace
D10R Track-Type Tractor Air Conditioner Belt - Inspect/Adjust/Replace
D10R Track-Type Tractor Bulldozer Tilt Brace
631G and 637G Wheel Tractor-Scrapers Hydraulic System Control Valve (Push-Pull)
Rerouting the Return-to-Tank Fuel Line{1274} Rerouting the Return-to-Tank Fuel Line{1274}
631G Wheel Tractor-Scraper Capacities (Refill)
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Fuel System Pressure - Test
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Fuel System - Prime
Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070} Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070}
2002/10/28 Correction to Operation and Maintenance Manual , "Equipment Lowering with Engine Stopped" {7000}
631G and 637G Wheel Tractor-Scrapers Hydraulic System Apron
2002/10/28 Examine Failed Starting Motors to Understand the Reason for Failure {1453}
631G and 637G Wheel Tractor-Scrapers Hydraulic System Apron
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Test/Enable Switch
C15 Petroleum Generator Set Engines Electric Starting Motor
2002/10/28 Correction to Operation and Maintenance Manual , "Equipment Lowering with Engine Stopped" {7000}
631G and 637G Wheel Tractor-Scrapers Machine Systems Bail Cylinder and Mounting
3126B Machine Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
D10R Main Frame and Fender Crossbeam Pinned Mount Conversion{7050} D10R Main Frame and Fender Crossbeam Pinned Mount Conversion{7050}
D10R Track-Type Tractor Safety Messages
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.