G3500B Engines Caterpillar


Fumes Disposal Filter Differential Pressure - Check

Usage:

G3516B 7EZ


Ilustrace 1g00829797
Tlakoměr na vrchní části filtru

Zkontrolujte diferenciální tlak filtrační vložky. Sledujte tlak ukázaný tlakoměrem umístěným na vrchní části filtru. Zaznamenejte naměřenou hodnotu.

U nové vložky je omezení přibližně 1,7 kPa (7 inch H2O).

Normální omezení vložky je přibližně 5,7 až 9,95 kPa (23 až 40 inch H2O).

  • Vyměňte filtrační vložku, když diferenciální tlak dosáhne hodnoty 11,2 kPa (45 inch H2O).

  • Vyměňte vložku vždy po roce, bez ohledu na diferenciální tlak.

Caterpillar Information System:

3176C, 3196 and 3406E Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders Low Power/Poor or No Response to Throttle
Installation of Automatic Lubrication for the 966G and the 972G Wheel Loaders{7540} Installation of Automatic Lubrication for the 966G and the 972G Wheel Loaders{7540}
966H and 972H Wheel Loaders Machine Systems Electrohydraulic Control - Install
D3G, D4G and D5G Track-Type Tractors Piston Pump (Hydrostatic)
D6R Series II Track-Type Tractor Power Train Bevel and Transfer Gears - Assemble
621G and 627G Wheel Tractor-Scrapers Machine Systems Air Tank - Remove and Install
621G and 623G Wheel Tractor Power Train Final Drive - Assemble
D6R Series II Track-Type Tractor Power Train Bevel and Transfer Gears - Disassemble
3056 Engines Cylinder Head
D3G, D4G and D5G Hystat Track-Type Tractors Engine Supplement Water Pump - Install
3056 Engines Connecting Rod
2001/10/08 An Improved Accumulator Spring Assembly is Now Used in the Valves for the Electronic Brake (EB) and the Electronic Clutch/Brake (ECB) {5051}
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader Cat Data Link Circuit - Test
966G Series II and 972G Series II Wheel Loaders Engine Supplement Hydraulic Oil Cooler - Remove and Install
D7R Series II Track-Type Tractor Hydraulic System Winch Control Valve
G3612 and G3616 Engines Crankcase Pressure - Measure - Engines with Fumes Disposal Filters
G3500B Engines Fumes Disposal Filter Element - Replace
980H Wheel Loader Machine Systems Seat - Remove
D3G, D4G and D5G Hystat Track-Type Tractors Engine Supplement Air Cleaner - Remove and Install
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Throttle Position Sensor Circuit - Test
621G and 627G Wheel Tractor-Scrapers Machine Systems Steering Cylinder - Remove
D3G, D4G and D5G Hystat Track-Type Tractors Engine Supplement Fuel Shutoff Solenoid - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.