Roller (Floor) - Install
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1U-9745 | Hydraulic Jack | 1 |
| B | 8F-4225 | Bolts 3/4-10 x 10 in | 2 |
- Attach a suitable lifting device onto bracket (1). The weight of bracket (1) is approximately 30 kg (65 lb). Position bracket (1) and install shims (4) and Tooling (B) .
Show/hide table
 | |
| Illustration 1 | g01077930 |
- Remove the suitable lifting device. Install bolt (2) into bracket (1). Remove Tooling (B) from bracket (1) .
Show/hide table
 | |
| Illustration 2 | g01077928 |
- Install bolts (3) into bracket (1). Remove Tooling (A) from the scraper floor.
Show/hide table
 | |
| Illustration 3 | g01077927 |
Caterpillar Information System:
D6R Series II Track-Type Tractor Power Train Transmission Hydraulic Control
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems Piston Pump Neutral - Adjust
D3G, D4G and D5G HYSTAT Track-Type Tractors Winch Systems Winch Control Centering - Adjust
D3G, D4G and D5G HYSTAT Track-Type Tractors Winch Systems Piston Pump Neutral - Adjust
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Crossover Relief Valve - Adjust
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Charge Relief Valve - Adjust
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Pressure Override Valve - Adjust
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Service Brake Switch - Adjust
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems Steering - Test
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems Final Hydrostatic Speed - Test
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems Hydrostatic and Implement Stall - Test
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems Hydrostatic Stall - Test
621G and 627G Wheel Tractor-Scrapers Machine Systems Air Dryer - Remove and Install
D8R Series II Track-Type Tractor Hydraulic System Quick-Drop Valve
D8R Series II Track-Type Tractor Hydraulic System Bulldozer Lift Control Valve
621G and 627G Wheel Tractor-Scrapers Machine Systems Air Control Valve (Service Brake) - Remove and Install
621G and 627G Wheel Tractor-Scrapers Machine Systems Metering Pump (Steering) - Remove and Install
980G Series II Wheel Loader Engine Supplement Water Temperature Regulator - Remove and Install - Engine in Chassis
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0646 - FMI 05
3176C and 3406E Engines for Caterpillar Built Machines CID 0096 FMI 03 Fuel Level Sensor open/short to +batt
3176C and 3406E Engines for Caterpillar Built Machines CID 0096 FMI 04 Fuel Level Sensor short to ground
3456 Engines for Caterpillar Built Machines CID 0457 FMI 08 Brake Oil Temperature Sensor signal abnormal
3456 Engines for Caterpillar Built Machines CID 0826 FMI 08 Torque Converter Oil Temperature signal abnormal
D5N Track-Type Tractor Power Train General Information