D6R Series II Track-Type Tractor Power Train Caterpillar


Transmission Hydraulic Control

Usage:

D6R II AAX



Illustration 1g01152957

(1) Main relief valve

(2) Torque for four bolts ... 48 ± 4 N·m (35 ± 3 lb ft)

(3) Transmission output speed sensors

(4) Torque for nuts that hold the coil assemblies in place ... 13.0 ± 1.5 N·m (115 ± 13 lb in)

(5) Torque for five cartridge assemblies ... 50 ± 5 N·m (37 ± 4 lb ft)

(6) Torque for ten bolts ... 30 ± 4 N·m (265 ± 35 lb in)

(7) Torque for five hydraulic fittings ... 14 ± 4 N·m (124 ± 35 lb in)

(8) Modulating valves ... Five

(9) Lubricate the lip of the seal with the lubricant that is being sealed.

(10) Torque for nut ... 9 ± 1 N·m (80 ± 9 lb in)

Caterpillar Information System:

D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems Piston Pump Neutral - Adjust
D3G, D4G and D5G HYSTAT Track-Type Tractors Winch Systems Winch Control Centering - Adjust
D3G, D4G and D5G HYSTAT Track-Type Tractors Winch Systems Piston Pump Neutral - Adjust
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Crossover Relief Valve - Adjust
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Charge Relief Valve - Adjust
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Pressure Override Valve - Adjust
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Service Brake Switch - Adjust
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems Steering - Test
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems Final Hydrostatic Speed - Test
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems Hydrostatic and Implement Stall - Test
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems Hydrostatic Stall - Test
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems Implement Stall - Test
623G Wheel Tractor-Scraper Machine Systems Roller (Floor) - Install
621G and 627G Wheel Tractor-Scrapers Machine Systems Air Dryer - Remove and Install
D8R Series II Track-Type Tractor Hydraulic System Quick-Drop Valve
D8R Series II Track-Type Tractor Hydraulic System Bulldozer Lift Control Valve
621G and 627G Wheel Tractor-Scrapers Machine Systems Air Control Valve (Service Brake) - Remove and Install
621G and 627G Wheel Tractor-Scrapers Machine Systems Metering Pump (Steering) - Remove and Install
980G Series II Wheel Loader Engine Supplement Water Temperature Regulator - Remove and Install - Engine in Chassis
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0646 - FMI 05
3176C and 3406E Engines for Caterpillar Built Machines CID 0096 FMI 03 Fuel Level Sensor open/short to +batt
3176C and 3406E Engines for Caterpillar Built Machines CID 0096 FMI 04 Fuel Level Sensor short to ground
3456 Engines for Caterpillar Built Machines CID 0457 FMI 08 Brake Oil Temperature Sensor signal abnormal
3456 Engines for Caterpillar Built Machines CID 0826 FMI 08 Torque Converter Oil Temperature signal abnormal
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.