3176C and 3406E Engines for Caterpillar Built Machines Caterpillar


CID 0096 FMI 04 Fuel Level Sensor short to ground

Usage:

R1600 9XP
Conditions Which Generate This Code:

The ECM detects the following condition:

  • The ECM reads signal voltage that is below 0.25 VDC.

System Response:

The ECM will log the diagnostic code. The diagnostic code may be viewed on a display module or on ET.

  • None

Test Step 1. Perform the following diagnostic procedure: Fuel Level Sensor Circuit - Test

Results:

  • OK - STOP

Caterpillar Information System:

3176C and 3406E Engines for Caterpillar Built Machines CID 0096 FMI 03 Fuel Level Sensor open/short to +batt
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0646 - FMI 05
980G Series II Wheel Loader Engine Supplement Water Temperature Regulator - Remove and Install - Engine in Chassis
621G and 627G Wheel Tractor-Scrapers Machine Systems Metering Pump (Steering) - Remove and Install
621G and 627G Wheel Tractor-Scrapers Machine Systems Air Control Valve (Service Brake) - Remove and Install
D8R Series II Track-Type Tractor Hydraulic System Bulldozer Lift Control Valve
D8R Series II Track-Type Tractor Hydraulic System Quick-Drop Valve
621G and 627G Wheel Tractor-Scrapers Machine Systems Air Dryer - Remove and Install
623G Wheel Tractor-Scraper Machine Systems Roller (Floor) - Install
D6R Series II Track-Type Tractor Power Train Transmission Hydraulic Control
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems Piston Pump Neutral - Adjust
D3G, D4G and D5G HYSTAT Track-Type Tractors Winch Systems Winch Control Centering - Adjust
3456 Engines for Caterpillar Built Machines CID 0457 FMI 08 Brake Oil Temperature Sensor signal abnormal
3456 Engines for Caterpillar Built Machines CID 0826 FMI 08 Torque Converter Oil Temperature signal abnormal
D5N Track-Type Tractor Power Train General Information
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0646 - FMI 06
3456 Engines for Caterpillar Built Machines Engine Sensor Open/Short Circuit - Test
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0650 - FMI 02
621G and 627G Wheel Tractor-Scrapers Machine Systems Evaporator Coil - Remove and Install
Instructions for the Installation of the 174-1508 Electric Motor {5927} Instructions for the Installation of the 174-1508 Electric Motor {5927}
994D Wheel Loader Backup Alarm - Test
621G and 627G Wheel Tractor-Scrapers Hydraulic System Operational Checks
621G and 627G Wheel Tractor-Scrapers Machine Systems Cab - Remove
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0660 - FMI 02
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.