Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately. |
NOTICE |
---|
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component. |
Replace the element of the primary filter/water separator according to the instructions that are provided by the OEM of the primary filter/water separator.
Note: It may be necessary to prime the fuel system before the engine will start. See this Operation and Maintenance Manual, "Fuel System - Prime" topic (Maintenance Section).