Plate Locations and Film Locations
Cat 代理商将需要序列号前缀和完整序列号,以便准确识别特定变速箱。
使用正确的 TH48-E80 配置总成号对用户、操作员和维修人员都很重要。
Show/hide table
图 1 | g02904502 |
(1) 通用警告
(2) 序列号铭牌 |
Show/hide table
图 2 | g01370904 |
该安全标志位于变速箱顶部。
Show/hide table
在阅读和了解⟪操作和保养手册⟫中的指示和警告之前,请勿操作机器。 不遵守这些警告,可能会导致人身伤亡。 如需更换手册,请与卡特彼勒代理商联系。 用户有责任对发动机作适当的关注。 |
Show/hide table
图 3 | g01677299 |
变速箱序列号____________________
图 3 显示了变速箱序列号铭牌。
Caterpillar Information System:
G3400 Engines (EIS) Shutdown Lamp
G3400 Engines (EIS) Propane Switch
C27 and C32 Industrial and Petroleum Engines Water Pump - Test
TH48-E80 Petroleum Transmission Capacities (Refill)
C27 and C32 Engines Cooling System - Test
3618 Engine Fuel System Primary Filter (Water Separator) Element - Replace
C27 and C32 Engines Cooling System - Check - Overheating
TH48-E80 Petroleum Transmission Lubricant Viscosities
C4.4 Marine Generator Set Engines Fuel Priming Pump and Fuel Filter Base - Remove and Install
G3400 Engines (EIS) Electrical Power Supply
C27 and C32 Engines Air Inlet and Exhaust System - Inspect
3618 Engine Refill Capacities and Recommendations
2005/04/11 Correction to Troubleshooting "Fuel Actuator" {1716}
Improving the Environment of the Operator{7301} Improving the Environment of the Operator{7301}
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
C4.4 Marine Generator Set Sea Water Strainer - Clean/Inspect
2005/04/11 Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
C9 Engines for Caterpillar Built Machines Air Inlet Heater - Remove
3054C and C4.4 Industrial Engine and Marine Auxiliary Engine Gear Group (Front)
C6.6 Industrial Engine Safety Messages
C280-16 Petroleum Engine Prelube Pump Motors
C13 and C15 On-highway Engines Power Is Intermittently Low or Power Cutout Is Intermittent
C1.5 GEN SET Electric Power Generation Reference Material
C9 Generator Set Engines Electronic Control System Components