Recommendations For Use Of Different Types Of Friction Discs In A Transmission{3155}
Usage:
All Machines Equipped With Power Shift Transmissions
Several different types of friction materials (including sintered bronze, paper and F37) are currently used on the friction discs for power shift transmissions. We recommend that all the friction discs in a transmission clutch be of the same type of material. The different clutches in the same transmission can have different types of friction discs. To make sure this is done, all the friction discs in a clutch must have the same part number.
Caterpillar Information System:
1983/11/21 Correct Installation Of New Valve Springs{1108}
1983/11/21 Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21 Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21 Crankshaft Failures{1202,1230}
1983/11/21 Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21 New Shafts Used In Fuel Injection Control Groups{1257}
1983/11/14 New Water Temperature Regulator Has Shorter Response Time{1355}
1983/11/14 Why MPG Suffers In Cold Weather{1250,1280}
1983/11/14 Improvements Made To Cooling System{1362,1353,1380}
1983/11/07 Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07 Use Of A High Temperature Regulator Will Keep Condensation To A Minimum{1355}
1983/11/07 Use 6V6070 Tool Group And New Adjustment Procedure For New Scroll Fuel System{0654,1264,1278}
1983/11/21 Service Information For Balancers And Dampers{1205}
1983/11/21 Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/12/05 Several Temperature Detectors Available For 6V6996 And 6V7118 Induction Bearing Heaters{0627}
1983/12/05 Mixture Of Inch And Metric Fasteners To Be Used{0683}
1983/12/05 6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05 Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area{1209,1208,1210}
1983/12/12 New Spring And Shaft Used In Governor Control Lever Have Increased Corrosion Resistance{1265}
1983/12/12 Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage{1052,1061}
1983/12/12 Cooling System Conditioner Helps Prevent Cavitation Damage{1350}
1983/12/12 Modification Of Control Panel Gives Different Power Source For Overcrank Timer To Prevent Starter Motor Failures{7450}
1983/12/19 Smaller Dowel, Stronger Cover Used On Oil Pump Drive Shaft{3310}
1983/12/19 Replacement Valve Guides Can Be Used To Recondition Cylinder Heads{1104}