Exhaust Manifold
Show/hide table
| |
| Illustration 1 | g01434396 |
| (1) Cylinder head | |
(2) Torque for the 12 taperlock studs ...
(3) Torque for the four taperlock studs ...
(4) Install the six gaskets with the tabs upward, as shown.
(5) Apply 4C-5599 Anti-Seize Compound to the bearing surfaces and the threads of the 12 locknuts before assembly.
Caterpillar Information System:
C7 and C9 Marine Engines Injection Actuation Pressure Control Valve Circuit - Test
C27 and C32 Generator Set Engines Crankshaft Main Bearings - Install
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Sea Water Module Interface
C27 and C32 Generator Set Engines Crankshaft Main Bearings - Remove
2005/03/01 New Serial Number Prefix {1000}
C9 Generator Set Engines Turbocharger
2005/03/01 The Cylinder Liners Have a New Appearance {1216}
C27 and C32 Generator Set Engines Connecting Rod Bearings - Install
3054E Industrial Engine Idler Gear (Front) - Remove
3054E Industrial Engine Crankshaft Wear Sleeve (Front) - Install
3054E Industrial Engine Crankshaft Wear Sleeve (Front) - Remove
3406E, C12, C15 and C18 Marine Engines Event Codes
C7 and C9 Engines for Caterpillar Built Machines Injection Actuation Pressure Control Valve Circuit - Test
784C and 785C Off-Highway Truck/Tractors Air Tank - Inspect
994F Wheel Loader Hydraulic System Electronic Control Module (ECM) - Replace
3054E Industrial Engine Idler Gear (Front) - Disassemble
3054E Industrial Engine Idler Gear (Front) - Assemble
3054E Industrial Engine Idler Gear (Front) - Install
C27 and C32 Generator Set Engines Crankshaft - Remove
C9 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Remove
C3.3 and C4.4 Generator Sets Fuel System Secondary Filter - Replace
C27 and C32 Generator Set Engines Crankshaft - Install
C9 Generator Set Engines Engine Oil Pan
C9 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Install