Water Pump - Remove
- Drain the coolant system. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".
Show/hide table
Illustration 1 g01143860 - Remove bolts (1).
- Remove housing (2).
Show/hide table
Illustration 2 g01143885 - Remove tube assembly (3) and tube assembly (4).
- Remove bolts (6).
- Remove water pump (5).
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Caterpillar Information System:
C11 and C13 Industrial Engines Engine Oil Cooler - Install
C7 and C9 Engines for Caterpillar Built Machines System Overview
C11 and C13 Industrial Engines Engine Oil Cooler - Remove
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Install
C27 and C32 Engines for Caterpillar Built Machines Replacing the ECM
C27 and C32 Generator Set Engines Fuel Transfer Pump - Remove
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Base - Install - C32
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Base - Remove - C32
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
C27 and C32 Engines for Caterpillar Built Machines Engine Wiring Information
Using Caterpillar Replacement Thread Inserts {0676} Using Caterpillar Replacement Thread Inserts {0676}
C11 and C13 Industrial Engines Exhaust Manifold - Remove and Install
C11 and C13 Industrial Engines Water Pump - Install
C11 and C13 Industrial Engines Water Temperature Regulator Housing - Remove and Install
C11 and C13 Industrial Engines Flywheel - Remove
C27 and C32 Engines for Caterpillar Built Machines Injector Trim File
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers ECM Will Not Accept Factory Passwords
C11 and C13 Industrial Engines Flywheel - Install
C27 and C32 Engines for Caterpillar Built Machines Excessive Valve Lash
3512C Petroleum Engines Gauges and Indicators
C11 and C13 Petroleum Engines Vibration Damper and Pulley - Remove and Install
C11 and C13 Petroleum Engines Front Cover - Remove
C11 and C13 Petroleum Engines Front Cover - Install
C27 and C32 Engines for Caterpillar Built Machines Mechanical Noise (Knock) in Engine