C11 and C13 Petroleum Engines Caterpillar


Front Cover - Remove

Usage:

C13 A5K

Removal Procedure

Start By:

  1. Remove the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Remove".

  2. Remove the crankshaft front seal. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove".


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.



NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.

Dispose of all fluids according to local regulations and mandates.




    Illustration 1g01015022

  1. Remove bolts (1).

  2. Remove studs (2).

  3. Remove front cover (3) and the gasket.

Caterpillar Information System:

C11 and C13 Petroleum Engines Vibration Damper and Pulley - Remove and Install
3512C Petroleum Engines Gauges and Indicators
C27 and C32 Engines for Caterpillar Built Machines Excessive Valve Lash
C11 and C13 Industrial Engines Flywheel - Install
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers ECM Will Not Accept Factory Passwords
C27 and C32 Engines for Caterpillar Built Machines Injector Trim File
C11 and C13 Industrial Engines Flywheel - Remove
C11 and C13 Industrial Engines Water Temperature Regulator Housing - Remove and Install
C11 and C13 Industrial Engines Water Pump - Install
C11 and C13 Industrial Engines Water Pump - Remove
C11 and C13 Industrial Engines Engine Oil Cooler - Install
C7 and C9 Engines for Caterpillar Built Machines System Overview
C11 and C13 Petroleum Engines Front Cover - Install
C27 and C32 Engines for Caterpillar Built Machines Mechanical Noise (Knock) in Engine
3408E and 3412E Engines for Caterpillar Built Machines Electric Starting Motor
3408E and 3412E Engines for Caterpillar Built Machines Electric Starting Motor
3406E and C15 Marine Engines Electric Starting Motor
3408E and 3412E Engines for Caterpillar Built Machines Electric Starting Motor
3406E and C15 Marine Engines Alternator and Regulator
3406E and C15 Marine Engines Alternator and Regulator
3408B and 3408C Industrial and Marine Engines Alternator and Regulator
3406E and C15 Marine Engines Alternator and Regulator
C27 and C32 Engines for Caterpillar Built Machines Intermittent Low Power or Power Cutout
C27 and C32 Engines for Caterpillar Built Machines Low Power/Poor or No Response to Throttle
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.