Engine Oil Cooler - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Attach a suitable lifting device to engine oil cooler (2). The weight of engine oil cooler (2) is approximately
23 kg (50 lb) . - Position engine oil cooler (2) on the engine.
- Connect bonnet (1).
- Install bonnet (3).
- Install bolts (5) and (6).
- Connect hose (4).
- Fill the coolant system. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".
Show/hide table
Illustration 1 | g01143786 |
Caterpillar Information System:
C7 and C9 Engines for Caterpillar Built Machines System Overview
C11 and C13 Industrial Engines Engine Oil Cooler - Remove
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Install
C27 and C32 Engines for Caterpillar Built Machines Replacing the ECM
C27 and C32 Generator Set Engines Fuel Transfer Pump - Remove
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Base - Install - C32
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Base - Remove - C32
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
C27 and C32 Engines for Caterpillar Built Machines Engine Wiring Information
Using Caterpillar Replacement Thread Inserts {0676} Using Caterpillar Replacement Thread Inserts {0676}
C11 and C13 Industrial Engines Exhaust Manifold - Remove and Install
C11 and C13 Industrial Engines Turbocharger - Install
C11 and C13 Industrial Engines Water Pump - Remove
C11 and C13 Industrial Engines Water Pump - Install
C11 and C13 Industrial Engines Water Temperature Regulator Housing - Remove and Install
C11 and C13 Industrial Engines Flywheel - Remove
C27 and C32 Engines for Caterpillar Built Machines Injector Trim File
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers ECM Will Not Accept Factory Passwords
C11 and C13 Industrial Engines Flywheel - Install
C27 and C32 Engines for Caterpillar Built Machines Excessive Valve Lash
3512C Petroleum Engines Gauges and Indicators
C11 and C13 Petroleum Engines Vibration Damper and Pulley - Remove and Install
C11 and C13 Petroleum Engines Front Cover - Remove
C11 and C13 Petroleum Engines Front Cover - Install