Camshaft Bearings - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 129-6671     | Reaction Sleeve     | 1     |
129-6672 | Puller Plate     | 1     | |
129-6673 | Bearing Pilot     | 1     | |
129-6674 | Backup Plate     | 1     | |
6F-7032 | Bolt     | 1     | |
1P-5542 (1) | Taperlock Stud     | 1     | |
B     | 185-3989     | Thread Lubricant     | 1     |
C     | 8S-2241 (2)     | Camshaft Bearing Tool Group     | 1     |
Show/hide table
( 1 ) | Part of 1P-5545 Adapter Gp |
( 2 ) | All of the tools that are listed above are used with Tooling (C) . |
Start By:
- Remove the lifter group. Refer to Disassembly and Assembly, "Lifter Group - Remove and Install".
- Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove".
Note:
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install Tooling (A) . Apply Tooling (B) on the threads.
Show/hide table
Illustration 1 | g01016694 |
- Remove camshaft bearings (1) .
Caterpillar Information System:
3176C and 3196 Engines For Caterpillar Built Machines Camshaft Bearings - Install
3176C and 3196 Engines For Caterpillar Built Machines Camshaft - Install
615C Series II Wheel Tractor-Scraper Air System and Brakes Air Tank
D10R, D11R and D11R Carrydozer Track-Type Tractors Implement Electronic Control System Related Components
3056 Engine for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
D10R, D11R and D11R Carrydozer Track-Type Tractors Implement Electronic Control System Switches
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System VIMS-PC Software
515 and 525 Wheel SkiddersMachine Systems Heater Coil - Remove and Install
D6R Series II Track-Type Tractor Power Train Torque Converter
3056 Engine for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
C9 Engine For Caterpillar Built Machines Crankshaft Main Bearings - Install
3524B Engines for Off-Highway Trucks System Configuration Parameters
980G Wheel Loader Power Train Torque Converter
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Ground Level Shutdown Switch
D10R, D11R and D11R Carrydozer Track-Type Tractors Implement Electronic Control System Data Link
515 and 525 Wheel SkiddersMachine Systems Brake Accumulator - Remove and Install
973 Track-Type Loader General Operation
973 Track-Type Loader Bulldozing
992G Wheel Loader and 854G Wheel Dozer Steering System General Information (Steering)
3056 Engine for Caterpillar Built Machines Water Outlet Manifold - Remove
797 and 797B Off-Highway Truck/Tractors Braking System Service Tools
973 Track-Type Loader Dumping
973 Track-Type Loader Digging
515 and 525 Wheel SkiddersMachine Systems System Pressure - Release