Accumulator (Pilot Oil)
Show/hide table
 | |
| Illustration 1 | g00636462 |
(1) Torque for the valve cap ... 1.6 ± 0.1 N·m (14 ± .9 lb in)
(2) Tighten the two 030-9613 Hex Screws to the following torque. ... 2.25 ± 0.25 N·m (19.9 ± 2.2 lb in)
Dry nitrogen charge pressure ... 1000 kPa (145 psi)
Maximum working pressure ... 15000 kPa (2200 psi)
Maximum working temperature ... 70 °C (158 °F)
Minimum working temperature ... -40 °C (-40 °F)
Internal volume of the gas chamber ... 0.59 L (0.62 qt)
Caterpillar Information System:
824G , 825G and 826G Landfill Compactor Sampling Interval and Location of Sampling Valve
3056 Engine for Caterpillar Built Machines Fuel Injection Pump - Install
3056 Engine for Caterpillar Built Machines Fuel Injection Pump - Remove
615C Series II Wheel Tractor-Scraper Air System and Brakes Electronic Monitoring System (EMS)
3406E, C-10 and C-12 Truck Engines Aftercooler Core - Clean/Test - Air-To-Air Aftercooler
D9R Track-Type Tractor Towing the Machine
631E Series II, 633E Series II and 637E Series II Wheel Tractor Power Train Wheel Bearings - Adjust
924G and 924Gz Wheel Loaders Power Train Power Train Guard
908 Compact Wheel Loader Hydraulic System Bank Valve (Three)
631E Series II, 633E Series II and 637E Series II Wheel Tractor Power Train Transmission Hydraulic Control Primary Clutch Pressure - Test
3056E Industrial Engine Cooling System
924G and 924Gz Wheel Loaders Power Train Window Wiper Motor
C9 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
908 Compact Wheel Loader Hydraulic System Solenoid Valve and Mounting (Pilot Shutoff)
631E Series II, 633E Series II and 637E Series II Wheel Tractor Power Train Differential and Bevel Gear - Adjust
615C Series II Wheel Tractor-Scraper Air System and Brakes General Information
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Fuel Filter Differential Pressure Switch
902 and 906 Compact Wheel Loaders Machine Systems Window Wiper Motor (Rear) - Install
C9 Engine For Caterpillar Built Machines Injection Actuation Pressure Sensor - Remove and Install
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Payload Memory Capacity
3056 Engine for Caterpillar Built Machines Lubrication System
3056 Engine for Caterpillar Built Machines Turbocharger - Install
980G Wheel Loader Hydraulic System Position Sensor (Control Lever)
631E Series II, 633E Series II and 637E Series II Wheel Tractor Power Train General Testing and Adjusting Information