Turbocharger
Show/hide table
Illustration 1 | g01116435 |
(1) Turbocharger
(2) Exhaust manifold
(3) Nuts
-
Prior to assembly, lubricate the threads and the bearing surfaces with 4C-5599 Anti-Seize Compound .
- Tighten the mounting nuts for the turbocharger to the following torque. ... 70 ± 15 N·m (50 ± 11 lb ft)
Caterpillar Information System:
C15 and C18 Tier 4 Final Engines Cooling System - Check - Overheating
C15 and C18 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove
C3.3 and C4.4 Generator Sets Fuel System Primary Filter/Water Separator - Drain
C-10 Petroleum Engine Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Sensors and Electrical Connectors
3508B, 3512B and 3516B Generator Set Engines Exhaust Manifold - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Front Cover - Install
C9 Marine Generator Set Belts - Inspect/Adjust/Replace
C15 and C18 Engines for Caterpillar Built Machines Front Cover - Remove
C15 and C18 Tier 4 Final Engines Turbocharger - Inspect
C15 and C18 Engines for Caterpillar Built Machines Camshaft - Remove
C15 and C18 Engines for Caterpillar Built Machines Camshaft - Install
C-10 Petroleum Engine Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Pressure Differential Switch
C15 and C18 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
3412E Petroleum Engine General Information
C9 Marine Generator Set Fuel System Secondary Filter - Replace
C15 and C18 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
3508B, 3512B and 3516B Generator Set Engines Turbocharger - Remove
C15 and C18 Engines for Caterpillar Built Machines Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines Crankshaft - Remove
C15 and C18 Engines for Caterpillar Built Machines Crankshaft - Install