C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Belt Tensioner

Usage:

826K 2L3


图 1g01116762
典型实例
(3) 安装支架

(1) 螺栓的扭矩 ... 50 ± 5 N·m (37 ± 4 lb ft)

(2) 皮带不在张紧装置上时张紧装置处在自由位置。 从自由位置到 30 度角旋转张紧装置要求的扭矩 ... 58.8 ± 5.9 N·m (43 ± 4 lb ft)

Caterpillar Information System:

3508B, 3512B and 3516B Generator Set Engines Turbocharger - Remove
C15 and C18 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
C9 Marine Generator Set Fuel System Secondary Filter - Replace
3412E Petroleum Engine General Information
C15 and C18 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Pressure Differential Switch
C-10 Petroleum Engine Exhaust Manifold
C15 and C18 Engines for Caterpillar Built Machines Camshaft - Install
C15 and C18 Engines for Caterpillar Built Machines Camshaft - Remove
C-10 Petroleum Engine Turbocharger
C15 and C18 Tier 4 Final Engines Cooling System - Check - Overheating
C15 and C18 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove
C15 and C18 Engines for Caterpillar Built Machines Crankshaft - Remove
C15 and C18 Engines for Caterpillar Built Machines Crankshaft - Install
C-10 Petroleum Engine Engine Oil Pan
3508B, 3512B and 3516B Generator Set Engines Turbocharger - Install
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Connector Locations
Installation Procedures for the 259-4020 Voltage Regulator Assembly (for use with Caterpillar Power Modules Equipped with Legacy Switchgear that Utilize the 131-5374 Annunciator Module Control Group ){4467} Installation Procedures for the 259-4020 Voltage Regulator Assembly (for use with Caterpillar Power Modules Equipped with Legacy Switchgear that Utilize the 131-5374 Annunciator Module Control Group ){4467}
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Diagnostic Capabilities
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines J1939 Bridge
3508C, 3512C and 3516C Marine Engines Water Temperature Regulators - Remove
3508C, 3512C and 3516C Marine Engines Water Temperature Regulators - Install
C-10 Petroleum Engine Piston Cooling Jet
349F and 352F Excavators Swing Drive Oil - Change
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.