Air Lines
Show/hide table
| |
| Illustration 1 | g02579997 |
Show/hide table
| Specification for 310-3145 Air Lines Gp | |||
| Item | Qty | Part | Specification Description |
| - | 8 | 3H-6624 Bolt | Use the following procedure to tighten the bolts:
1. Tighten the bolt 1 through bolt 16 in a numerical sequence to 2. Tighten the bolt 1 through bolt 8 in a numerical sequence to 3. Position the air lines with the compressor housing and the adapter of aftercooler, so that the air lines are aligned properly with each other. 4. Tighten the bolt 9 through bolt 16 in a numerical sequence to |
| - | 8 | 4B-3388 Bolt | |
| 17 | 4 | 130-5694 O-Ring Seal | Lubricate the bore of eight O-ring seals lightly with 5P-3975 Rubber Lubricant. |
| 18 | 4 | 6V-3917 O-Ring Seal | Lubricate the bore of eight O-ring seals lightly with 5P-3975 Rubber Lubricant. |
Caterpillar Information System:
G3406 and G3412 Generator Sets Voltage Regulators
390D Excavator Access Door and Cover Locations
3126B Engine for Caterpillar Built Machines Flywheel Housing
C9.3 Engine for Caterpillar Built Machines Valve Mechanism
C32 Marine and Auxiliary Marine Engines Aftercooler
3412E Petroleum Engine Aftercooler
C27 and C32 Generator Set Engines Electronic Unit Injector Sleeve - Remove
C13, C15, and C18 Tier 4 Final Engines Fuel Filter Base
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector - Install
C27 and C32 Generator Set Engines Electronic Unit Injector - Remove
3508C, 3512C and 3516C Marine Engines Water Pump - Assemble
3508C, 3512C and 3516C Marine Engines Water Pump - Disassemble
C32 Marine and Auxiliary Marine Engines Alternator Mounting
2005/11/14 Improvements to Turbocharger and Exhaust Manifold Groups {1052, 1059, 1061}
3508B, 3512B and 3516B Generator Set Engines Aftercooler - Remove and Install
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Electronic Control Module (ECM)
PL1000E Communication ECM Wiring Harness
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Configuration
2007/04/30 A New Oversized Oil Pump Idler Gear Shaft is Available {1304}
3126B Petroleum Engine Cylinder Head Valves
G3500 Engines Exhaust Manifold - Inspect - Water Cooled Exhaust Manifolds
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines General Information
C15 and C18 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Service Tools