PL1000E Communication ECM Caterpillar


Wiring Harness

Usage:

SR4B 1BN
Refer to the wiring schematic that is in the "System Schematic" section of this document. The PL1000E Communications ECM will require a custom wire harness in order to implement the appropriate connections that are associated with the PL1000E features.

A pre-fabricated harness assembly is available. The harness will provide the connections for ground, power, key switch, CDL, J1939 and the Service Tool Port Group. Refer to the wiring that is shown in BOLD in the schematic that is shown in the "System Schematic" section of this document.

Refer to Special Instruction, REHS2362, "Installation Guide for the PL1000E Communications ECM" for additional wiring harness information.

Caterpillar Information System:

GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Electronic Control Module (ECM)
3508B, 3512B and 3516B Generator Set Engines Aftercooler - Remove and Install
2005/11/14 Improvements to Turbocharger and Exhaust Manifold Groups {1052, 1059, 1061}
C32 Marine and Auxiliary Marine Engines Alternator Mounting
C27 and C32 Industrial and Petroleum Engines Air Lines
G3406 and G3412 Generator Sets Voltage Regulators
390D Excavator Access Door and Cover Locations
3126B Engine for Caterpillar Built Machines Flywheel Housing
C9.3 Engine for Caterpillar Built Machines Valve Mechanism
C32 Marine and Auxiliary Marine Engines Aftercooler
3412E Petroleum Engine Aftercooler
C27 and C32 Generator Set Engines Electronic Unit Injector Sleeve - Remove
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Configuration
2007/04/30 A New Oversized Oil Pump Idler Gear Shaft is Available {1304}
3126B Petroleum Engine Cylinder Head Valves
G3500 Engines Exhaust Manifold - Inspect - Water Cooled Exhaust Manifolds
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines General Information
C15 and C18 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Service Tools
C32 Marine and Auxiliary Marine Engines Auxiliary Water Pump
2004/11/01 Improved Oil Pan {1302}
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pan
3126B Petroleum Engine Exhaust Manifold
C11 and C13 Engines Engine Oil Pan
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.