Electronic Unit Injector Sleeve - Remove
Show/hide table
| Alat yang Diperlukan | |||
|---|---|---|---|
| Alat | Nomor Suku Cadang | Keterangan Suku Cadang | Jml |
| A | 9U-6891 | Grup Alat Injektor | 1 |
Dimulai dengan:
- Lepaskan injektor unit elektronik. Rujuk ke Pembongkaran dan Perakitan, "Injektor Unit Elektronik - Pelepasan".
Show/hide table
| PERHATIAN |
|---|
|
Pastikan semua suku cadang bersih dari kontaminan. Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen. |
- Kuras cairan pendingin dari sistem pendinginan ke wadah yang sesuai untuk penyimpanan atau pembuangan. Rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Cairan Pendingin Sistem Pendinginan - Penggantian".
Show/hide table
Ilustrasi 1 g01043124 - Pasang Alat (A) di selongsong injektor unit elektronik (1).
- Kencangkan mur pada Alat (A) hingga selongsong injektor unit elektronik tertarik keluar dari cylinder head.
Show/hide table
Ilustrasi 2 g01073635 - Lepaskan seal O-ring (2) dan seal O-ring (3) dari selongsong injektor unit elektronik (1).
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Fuel Filter Base
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector - Install
C27 and C32 Generator Set Engines Electronic Unit Injector - Remove
3508C, 3512C and 3516C Marine Engines Water Pump - Assemble
3508C, 3512C and 3516C Marine Engines Water Pump - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
C32 Marine and Auxiliary Marine Engines Heat Exchanger
C15 and C18 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
3412E Petroleum Engine Air Inlet and Exhaust Lines
C27 and C32 Industrial and Petroleum Engines Flywheel Housing
390F MHPU Mobile Hydraulic Power Unit Engine Oil Level - Check
390F MHPU Mobile Hydraulic Power Unit Cooling System Coolant Sample (Level 1) - Obtain
3412E Petroleum Engine Aftercooler
C32 Marine and Auxiliary Marine Engines Aftercooler
C9.3 Engine for Caterpillar Built Machines Valve Mechanism
3126B Engine for Caterpillar Built Machines Flywheel Housing
390D Excavator Access Door and Cover Locations
G3406 and G3412 Generator Sets Voltage Regulators
C27 and C32 Industrial and Petroleum Engines Air Lines
C32 Marine and Auxiliary Marine Engines Alternator Mounting
2005/11/14 Improvements to Turbocharger and Exhaust Manifold Groups {1052, 1059, 1061}
3508B, 3512B and 3516B Generator Set Engines Aftercooler - Remove and Install
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Electronic Control Module (ECM)
PL1000E Communication ECM Wiring Harness