Aftercooler
Show/hide table
 | |
| Illustration 1 | g02580037 |
Right side view of engine | |
Show/hide table
| Specification for 238-8702 Raw Water Aftercooler Gp 305-3729 Raw Water Aftercooler Gp 285-5973 Raw Water Aftercooler Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 3P-0655 O-Ring Seal | Lubricate the bore of the O-ring seals lightly with 5P-3975 Rubber Lubricant. |
Caterpillar Information System:
3412E Petroleum Engine Aftercooler
C27 and C32 Generator Set Engines Electronic Unit Injector Sleeve - Remove
C13, C15, and C18 Tier 4 Final Engines Fuel Filter Base
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector - Install
C27 and C32 Generator Set Engines Electronic Unit Injector - Remove
3508C, 3512C and 3516C Marine Engines Water Pump - Assemble
3508C, 3512C and 3516C Marine Engines Water Pump - Disassemble
C15 and C18 Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
C32 Marine and Auxiliary Marine Engines Heat Exchanger
C15 and C18 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
3412E Petroleum Engine Air Inlet and Exhaust Lines
C27 and C32 Industrial and Petroleum Engines Flywheel Housing
C9.3 Engine for Caterpillar Built Machines Valve Mechanism
3126B Engine for Caterpillar Built Machines Flywheel Housing
390D Excavator Access Door and Cover Locations
G3406 and G3412 Generator Sets Voltage Regulators
C27 and C32 Industrial and Petroleum Engines Air Lines
C32 Marine and Auxiliary Marine Engines Alternator Mounting
2005/11/14 Improvements to Turbocharger and Exhaust Manifold Groups {1052, 1059, 1061}
3508B, 3512B and 3516B Generator Set Engines Aftercooler - Remove and Install
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Electronic Control Module (ECM)
PL1000E Communication ECM Wiring Harness
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Configuration
2007/04/30 A New Oversized Oil Pump Idler Gear Shaft is Available {1304}