Light Switches
Show/hide table
Illustration 1 | g00601618 |
Show/hide table
Dash Panel Lights and Front Floodlights (1) - Push the rocker switch to the middle position in order to turn on the dash lights. Push the rocker switch to the top position. The top position turns on the dash panel lights. The top position also turns on the front floodlights, and the throttle switch light. |
Show/hide table
Side Floodlights (2) - Push the rocker switch to the top position in order to turn on the side floodlights. |
Show/hide table
Rear Floodlights and Light on the Ripper (3) - Push the rocker switch to the middle position in order to turn on the rear floodlights. Push the rocker switch to the top position in order to turn on the rear floodlights and the light on the ripper, if equipped. |
Auxiliary Circuit (4) - Push the rocker switch to the top position in order to activate the auxiliary electrical connector. The auxiliary electrical connector is located on the inner face of the right fender below the hydraulic tank. A 24 volt intermittent light may be connected to the two-pin connector. A 10 AMP fuse protects the circuit. The fuse is located beneath the dash panel.
Show/hide table
Rotating Beacon (4) - The auxiliary circuit also serves as the switch for the rotating beacon. This circuit is provided for machines that are delivered to Europe. |
Show/hide table
Illustration 2 | g00038302 |
Show/hide table
Interior Dome Light - Push the rocker switch upward to the top position. This will turn on the light. |
Show/hide table
Illustration 3 | g00424185 |
Show/hide table
Electrical Outlet - A 24 volt trouble light may be connected to the electrical outlet. The electrical outlet is behind the operator's seat. A 15 AMP breaker protects the circuit. The breaker is located in the fuse panel. |
Caterpillar Information System:
561M Pipelayer Final Drive Oil Sample - Obtain
963B Track-Type Loader Battery - Inspect
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Creeper Control - If Equipped
3046 Engine For Caterpillar Built Machines Crankshaft Rear Seal - Install
D9R Track-Type Tractor Tachometer
515 Wheel Skidder and 525 Wheel Skidder Cooling System Coolant Additive (DEAC) - Add
545 Wheel Skidder Hydraulic and Steering System Articulated Hitch
515 Wheel Skidder and 525 Wheel Skidder Cooling System Coolant (ELC) - Change
980G Wheel Loader Machine Systems Pilot Valve (Oil Manifold) - Disassemble
515 Wheel Skidder and 525 Wheel Skidder Cooling System Coolant (DEAC) - Change
D9R Track-Type Tractor Digital Display Window
994D Air System Wheel Loader Air Horn
515 Wheel Skidder and 525 Wheel Skidder Cooling System Coolant Extender (ELC) - Add
D9R Track-Type Tractor Parking Brake Control
963B Track-Type Loader Circuit Breakers - Reset
515 Wheel Skidder and 525 Wheel Skidder Cooling System Coolant Sample - Obtain
994D Air System Wheel Loader Governor (Air Compressor)
623F Wheel Tractor-Scraper Hydraulic System Pilot Control Valve (Three Functions)
623F Wheel Tractor-Scraper Machine Systems Tractor and Scraper - Separate
623F Wheel Tractor-Scraper Machine Systems Tractor and Scraper - Connect
994D Air System Wheel Loader Pressure Sensor (Air Tank)
973 Track-Type Loader Power Train System Schematics
963B Track-Type Loader Fuses - Replace
3046 Engine For Caterpillar Built Machines Flywheel Housing - Remove and Install