Valve Mechanism Cover Base - Remove and Install
Removal Procedure
Start By:
- Remove the valve mechanism covers. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect harness assembly (2) and harness assemblies (5) .
Show/hide table
 | |
| Illustration 1 | g01114068 |
- Remove breather assembly (3) .
- Remove bolts (4) .
- Remove valve cover base (1) .
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position valve cover base (1) on the engine.
Show/hide table
| | |
| Illustration 2 | g01114068 |
Show/hide table
 | |
| Illustration 3 | g01057885 |
- Install bolts (4). Tighten the bolts in a numerical sequence.
- Install breather assembly (3) .
- Connect harness assemblies (5) and harness assembly (2). Tighten the nuts for harness assemblies (5) to a torque of 2.5 ± 0.25 N·m (22 ± 2 lb in).
End By: Install the valve mechanism covers. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Caterpillar Information System:
3126B Petroleum Engine Cooling System - Check - Overheating
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Assemble
3408C and 3412C Marine Engines Engine Oil Filter Base
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Disassemble
C12 Marine Engines Marine Transmission Oil Cooler - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Solenoid Valve (Proportional Reducing) - Power Shift System
C27 and C32 Industrial and Petroleum Engines Exhaust Manifold
C27 and C32 Industrial and Petroleum Engines Turbocharger
C9.3 Engine for Caterpillar Built Machines Valve Mechanism Cover
C12 Marine Engines Fuel Pressure Sensor - Remove and Install
C12 Marine Engines Fuel Temperature Sensor - Remove and Install
C12 Marine Engines Inlet Air Temperature Sensor - Remove and Install
2004/11/01 Improved Turbocharger Groups {1052}
C27 and C32 Engines for Caterpillar Built Machines Cylinder Liner
C27 and C32 Engines for Caterpillar Built Machines Crankshaft
C32 Marine and Auxiliary Marine Engines Vibration Damper and Pulley
3508B, 3512B and 3516B Generator Set Engines Air Inlet Manifold - Remove and Install
3054 and 3056 Marine Generator Sets Maintenance Interval Schedule - 3054 Turbocharged Marine Generator Set Engine
3054 and 3056 Marine Generator Sets Maintenance Interval Schedule - 3056 Turbocharged Marine Generator Set Engine
C27 and C32 Generator Set Engines Piston and Rings
3412E Petroleum Engine Valve Mechanism Cover
320D Excavator Boom, Stick and Bucket Operation
C0.5 and C0.7 Industrial Engines Engine Starting
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines General Information