Engine Oil Filter Base
Show/hide table
Illustration 1 | g01579553 |
(3) Engine oil filter |
Note: The oil cooler bypass valve and the oil filter bypass valve must open with a pressure difference of 193 ± 21 kPa (28 ± 3 psi).
(1) 4N-8150 Spring
- Quantity ... 2
- Length under test force ... 55.24 mm (2.175 inch)
- Test force ... 75.619 ± 5.800 N (17.0 ± 1.3 lb)
- Free length after test ... 93.726 mm (3.6900 inch)
- Outside diameter ... 20.6 mm (0.81 inch)
- Length under test force ... 55.24 mm (2.175 inch)
(2) Hollow stud
- Length for applying 154-9731 Thread Lock Compound on the tapered end of the hollow stud ... 7.6 mm (0.30 inch)
- Torque for two hollow studs ... 81 ± 14 N·m (60 ± 10 lb ft)
Caterpillar Information System:
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Disassemble
C12 Marine Engines Marine Transmission Oil Cooler - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Solenoid Valve (Proportional Reducing) - Power Shift System
C27 and C32 Industrial and Petroleum Engines Exhaust Manifold
C27 and C32 Industrial and Petroleum Engines Turbocharger
C9.3 Engine for Caterpillar Built Machines Valve Mechanism Cover
C12 Marine Engines Fuel Pressure Sensor - Remove and Install
C12 Marine Engines Fuel Temperature Sensor - Remove and Install
C12 Marine Engines Inlet Air Temperature Sensor - Remove and Install
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Install
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Remove
C12 Marine Engines Boost Pressure Sensor - Remove and Install
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Assemble
3126B Petroleum Engine Cooling System - Check - Overheating
C12 Marine Engines Valve Mechanism Cover Base - Remove and Install
2004/11/01 Improved Turbocharger Groups {1052}
C27 and C32 Engines for Caterpillar Built Machines Cylinder Liner
C27 and C32 Engines for Caterpillar Built Machines Crankshaft
C32 Marine and Auxiliary Marine Engines Vibration Damper and Pulley
3508B, 3512B and 3516B Generator Set Engines Air Inlet Manifold - Remove and Install
3054 and 3056 Marine Generator Sets Maintenance Interval Schedule - 3054 Turbocharged Marine Generator Set Engine
3054 and 3056 Marine Generator Sets Maintenance Interval Schedule - 3056 Turbocharged Marine Generator Set Engine
C27 and C32 Generator Set Engines Piston and Rings
3412E Petroleum Engine Valve Mechanism Cover