Turbocharger
Show/hide table
Illustration 1 | g02578076 |
Show/hide table
Specification for 245-9734 Turbocharger Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 5S-4517 Clamp As | Use the following procedure to tighten the clamp assemblies for the turbocharger:
1. Tighten to 2. Lightly tap around the clamp assemblies with a soft faced hammer. 3. Again, tighten to |
2 | 1 | 7W-7778 Clamp As | |
3 | 4 | 2N-2766 Locknut | Torque to |
Caterpillar Information System:
C9.3 Engine for Caterpillar Built Machines Valve Mechanism Cover
C12 Marine Engines Fuel Pressure Sensor - Remove and Install
C12 Marine Engines Fuel Temperature Sensor - Remove and Install
C12 Marine Engines Inlet Air Temperature Sensor - Remove and Install
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Install
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Remove
C12 Marine Engines Boost Pressure Sensor - Remove and Install
C27 and C32 Tier 4 Engines Engine Design
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Accumulator (Pilot)
C11 and C13 Engines Flywheel Housing
345C Excavator Hydraulic System Displacement Change Valve
C12 Marine Engines Coolant Temperature Sensor - Remove and Install
C27 and C32 Industrial and Petroleum Engines Exhaust Manifold
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Solenoid Valve (Proportional Reducing) - Power Shift System
C12 Marine Engines Marine Transmission Oil Cooler - Remove and Install
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Disassemble
3408C and 3412C Marine Engines Engine Oil Filter Base
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Assemble
3126B Petroleum Engine Cooling System - Check - Overheating
C12 Marine Engines Valve Mechanism Cover Base - Remove and Install
2004/11/01 Improved Turbocharger Groups {1052}
C27 and C32 Engines for Caterpillar Built Machines Cylinder Liner
C27 and C32 Engines for Caterpillar Built Machines Crankshaft
C32 Marine and Auxiliary Marine Engines Vibration Damper and Pulley