Exhaust Manifold
Show/hide table
Illustration 1 | g01420166 |
Rear view of engine |
Show/hide table
Illustration 2 | g02592658 |
Locknut tightening sequence for exhaust manifold |
Show/hide table
Specification for 274-8565 Exhaust Manifold Gp | |||
Item | Qty | Part | Specification Description |
- | - | 4B-3823 Bolt
0S-0509 Bolt 0T-0055 Bolt 0T-0573 Bolt 3B-1915 Bolt 8S-9191 Bolt |
Use the following procedure for tightening bolt (1) through bolt (16):
1. Torque the bolt (1) through bolt (16) in a numerical sequence to 2. Torque the bolt (1) through bolt (6) in a numerical sequence to 3. Torque the bolt (7) and bolt (8) in a numerical sequence to 4. Torque the bolt (9) through bolt (16) in a numerical sequence to |
17 | 24 | 2N-2766 Locknut | Apply Loctite C5A Cooper Anti-Seize to the threads.
Torque the locknut 1 through locknut 12 in the numerical sequence that is shown in Illustration 2 to |
18 | 8 | 6L-8562 Taperlock Stud | Torque to |
19 | 4 | 109-0076 O-Ring Seal | Lightly lubricate the bore of the O-ring seals with the lubricant that is being sealed. |
Caterpillar Information System:
C27 and C32 Industrial and Petroleum Engines Turbocharger
C9.3 Engine for Caterpillar Built Machines Valve Mechanism Cover
C12 Marine Engines Fuel Pressure Sensor - Remove and Install
C12 Marine Engines Fuel Temperature Sensor - Remove and Install
C12 Marine Engines Inlet Air Temperature Sensor - Remove and Install
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Install
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Remove
C12 Marine Engines Boost Pressure Sensor - Remove and Install
C27 and C32 Tier 4 Engines Engine Design
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Accumulator (Pilot)
C11 and C13 Engines Flywheel Housing
345C Excavator Hydraulic System Displacement Change Valve
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Solenoid Valve (Proportional Reducing) - Power Shift System
C12 Marine Engines Marine Transmission Oil Cooler - Remove and Install
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Disassemble
3408C and 3412C Marine Engines Engine Oil Filter Base
3508C, 3512C and 3516C Marine Engines Engine Oil Filter Housing - Assemble
3126B Petroleum Engine Cooling System - Check - Overheating
C12 Marine Engines Valve Mechanism Cover Base - Remove and Install
2004/11/01 Improved Turbocharger Groups {1052}
C27 and C32 Engines for Caterpillar Built Machines Cylinder Liner
C27 and C32 Engines for Caterpillar Built Machines Crankshaft
C32 Marine and Auxiliary Marine Engines Vibration Damper and Pulley
3508B, 3512B and 3516B Generator Set Engines Air Inlet Manifold - Remove and Install