Transmission and Bevel Gears - Connect
Connection Procedure
Show/hide table
Required Tools     | A     | B     |
1P-2420 Transmission Repair Stand     | 1     |     |
138-7575 Link Bracket     |     | 2     |
- Put the O-ring seals into position on sleeve (3). Put the sleeve into position in the transmission case.
Show/hide table
Illustration 1 | g00560575 |
- Put O-ring seal (4) into position on the transmission case. Put clean oil on the O-ring seals.
- Fasten a hoist and Tooling (B) to bevel gears (1). Put the gears into position on the transmission and install three bolts (2) .
Show/hide table
Illustration 2 | g00560574 |
End By:
- Install the transmission hydraulic control valves. Refer to Disassembly and Assembly, "Transmission Hydraulic Control Valve - Install" for the machine that is being serviced.
- Install the transmission and the bevel gears. Refer to Disassembly and Assembly, "Transmission and Bevel Gears - Install" for the machine that is being serviced.
Caterpillar Information System:
D5M Track-Type TractorPower Train Transmission Hydraulic Control Valve - Remove
D5M Track-Type TractorPower Train Transmission Hydraulic Control Valve - Install
D5M Track-Type TractorPower Train Transmission Hydraulic Control Valve - Disassemble
D5M Track-Type TractorPower Train Transmission Hydraulic Control Valve - Assemble
D5M Track-Type TractorPower Train Transmission - Disassemble
D5M Track-Type TractorPower Train Transmission - Assemble
D5M Track-Type TractorPower Train Track Roller Frame - Remove
D5M Track-Type TractorPower Train Track Roller Frame - Install
D5M Track-Type TractorPower Train Track Roller - Remove
D5M Track-Type TractorPower Train Track Roller - Install
D5M Track-Type TractorPower Train Track Roller - Disassemble
D5M Track-Type TractorPower Train Track Roller - Assemble
D5M Track-Type TractorPower Train Transmission and Bevel Gears - Install
D5M Track-Type TractorPower Train Transmission and Bevel Gears - Remove
D5M Track-Type TractorPower Train Transmission and Bevel Gears - Separate
3406C Engines for Caterpillar Built Machines Cylinder Head
966G and 972G Wheel Loaders Radiator Core - Clean
D5M Track-Type TractorPower Train Bevel and Transfer Gears - Assemble
D5M Track-Type TractorPower Train Bevel and Transfer Gears - Disassemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Cab - Install
515 Wheel Skidder and 525 Wheel Skidder Window Wiper - Inspect/Replace
623F Wheel Tractor-Scraper Power Train Machine Preparation for Troubleshooting
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Truck Payload System (TPS) General Information
615C Series II Wheel Tractor-Scraper Machine Systems Brake Control Valve (Service) - Remove and Install