1983/04/04 Caterpillar


New Washer And Bolts Keep Fan Drive Tight{1359}

Usage:


All 3400 Industrial and Generator Set Engines

Description of Change: A thicker washer and self-locking bolts are used in the fan drive group on the above engines. The new bolts have a small deposit of nylon in the threads which keep the bolts tight. There have been reports of loose bolts on some fan drives. This permitted the fan to become loose and damage the radiator.

Adaptable As: The 7N2900 Washer and 5P7979 Bolts are a direct replacement for the former 5S7264 Washer and 1H5403 Bolts.


New washer and bolts for the fan drive.

Caterpillar Information System:

1983/04/04 Labyrinth-Type Seal Ring Available For Rear Power Takeoff{3055}
1983/04/04 New Gasket Prevents Leakage{1201,1362,1380}
1983/04/04 Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service{1202}
1983/04/04 Improved Valve Springs Available{1108}
1983/03/21 8S1603 Socket Group For Use On Bolts With 12 Point Heads{0612}
1983/03/21 New Turbocharger Inlet Tube Assembly And New Seal Available{1059,1061}
1983/03/21 FT1588 Cover Storage Rack{0634}
1983/03/21 New Shutoff Solenoid Group Used{1259}
1983/03/21 Application Of Labels To Plastic Tool Cases{0630}
1983/03/21 New Bolt Used In Front Engine Support{1154}
1983/03/14 Change Made To 6V3032 Deluxe Test Lead Kit{0651}
1983/03/14 Additions To Reference Chart For Major Production Changes{0374,0375,1000}
1983/04/04 Use The 6V5000 Infrared Thermometer Group To Measure Temperatures{0651}
1983/04/04 New Connecting Rod Bearings Used{1219,1230}
1983/04/18 Machine Available To Balance Turbochargers {0650,1052,1053,1077}
1983/04/18 New O-Ring Seals Used On Cover For Auxiliary Start Connector {1401,1402}
1983/04/18 Protection Of Electric System For Machines Used In Corrosive Applications {1400}
1983/04/18 New Special Instruction Available For 6V4135 Halogen Leak Detector {0651}
1983/04/18 Use Of 9S3265 Retaining Compound On AiResearch Turbocharger Compressor Wheel Retainer Nuts {1052,1053}
1983/04/18 Use Pneumatic Tool To Remove Gaskets, Sealants, Paints {0610}
1983/04/18 Changes And Recommendations For Oil Pumps {1304}
1983/04/18 Repair Kit For Diesel Fuel Heater Available {1296}
1983/04/18 Pistons With Thicker Top Rings Must Be Used In Correct Applications {1214,1215}
1983/04/18 Cutting Threads For Caterpillar Taperlock Studs {7553}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.