1983/03/14 Caterpillar


Additions To Reference Chart For Major Production Changes{0374,0375,1000}

Usage:


All 3208 Engines

The article "Reference Chart For Major Production Changes On 3208 Engines," in the Service Magazine dated October 19, 1981, has a list of articles that announced major changes to these engines. The articles in the chart that follows are additions to the earlier reference chart. Make a note of this new information in the earlier Service Magazine.

Caterpillar Information System:

1983/03/14 "Gas Engine Application And Installation Guide" Now Available{0374}
1983/03/14 Fabricated Bracket Decreases Stress On Refrigerant Compressor Bracket{1405,1802}
1983/03/14 New Manual BrakeSaver Control Group{1159}
1983/02/28 New Instruction Decal Used On 6V4060 Engine Set Point Indicator{0374}
1983/02/28 Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0652,1361}
1983/02/28 New Rack Shutoff Solenoid Available{1257,1259}
1983/02/28 Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28 Use FT1783 Fixture To Drill Vent Holes In Impeller{0665,1361}
1983/02/28 New Specifications For Installation Of Crankshaft Counterweight Bolts{1202}
1983/02/28 Test Procedure For Hydramechanical Shutoff After Engine Storage{7418}
1983/02/14 New Water Pump Has Improved Seal{1361}
1983/02/14 Check Cylinder Bores For Chamfer During Reconditioning{1202,1222,1223}
1983/03/14 Change Made To 6V3032 Deluxe Test Lead Kit{0651}
1983/03/21 New Bolt Used In Front Engine Support{1154}
1983/03/21 Application Of Labels To Plastic Tool Cases{0630}
1983/03/21 New Shutoff Solenoid Group Used{1259}
1983/03/21 FT1588 Cover Storage Rack{0634}
1983/03/21 New Turbocharger Inlet Tube Assembly And New Seal Available{1059,1061}
1983/03/21 8S1603 Socket Group For Use On Bolts With 12 Point Heads{0612}
1983/04/04 Improved Valve Springs Available{1108}
1983/04/04 Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service{1202}
1983/04/04 New Gasket Prevents Leakage{1201,1362,1380}
1983/04/04 Labyrinth-Type Seal Ring Available For Rear Power Takeoff{3055}
1983/04/04 New Washer And Bolts Keep Fan Drive Tight{1359}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.