1983/03/14 Caterpillar


"Gas Engine Application And Installation Guide" Now Available{0374}

Usage:


G342, G379, G398, G399, 3304, 3306 Gas Engines

The "Gas Engine Application And Installation Guide," Form LEBH2363 is now available.

This publication gives information on different fuel capabilities of the above engines, such as natural gas, vapor propane, liquid propane and dual fuels. It has information about the fuels, including their heat (Btu) content, and about the fuel systems used for the different fuels. Fuel system diagrams also are given.

The publication also has information for adjustment of the gas pressures, adjustments which are made on a basis of the type of engine operation and Btu content of the fuels. In addition, part numbers of regulator springs for the different pressure settings are given for the engines.

Also given is information on cooling systems, exhaust systems and protection systems, including both shut-off and alarm systems.

This publication is part of the Gas Engine Power System Manual, Form LEXX2342.

Caterpillar Information System:

1983/03/14 Fabricated Bracket Decreases Stress On Refrigerant Compressor Bracket{1405,1802}
1983/03/14 New Manual BrakeSaver Control Group{1159}
1983/02/28 New Instruction Decal Used On 6V4060 Engine Set Point Indicator{0374}
1983/02/28 Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0652,1361}
1983/02/28 New Rack Shutoff Solenoid Available{1257,1259}
1983/02/28 Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28 Use FT1783 Fixture To Drill Vent Holes In Impeller{0665,1361}
1983/02/28 New Specifications For Installation Of Crankshaft Counterweight Bolts{1202}
1983/02/28 Test Procedure For Hydramechanical Shutoff After Engine Storage{7418}
1983/02/14 New Water Pump Has Improved Seal{1361}
1983/02/14 Check Cylinder Bores For Chamfer During Reconditioning{1202,1222,1223}
1983/02/14 New Clutches For Rear Power Take-Off{3055,3054}
1983/03/14 Additions To Reference Chart For Major Production Changes{0374,0375,1000}
1983/03/14 Change Made To 6V3032 Deluxe Test Lead Kit{0651}
1983/03/21 New Bolt Used In Front Engine Support{1154}
1983/03/21 Application Of Labels To Plastic Tool Cases{0630}
1983/03/21 New Shutoff Solenoid Group Used{1259}
1983/03/21 FT1588 Cover Storage Rack{0634}
1983/03/21 New Turbocharger Inlet Tube Assembly And New Seal Available{1059,1061}
1983/03/21 8S1603 Socket Group For Use On Bolts With 12 Point Heads{0612}
1983/04/04 Improved Valve Springs Available{1108}
1983/04/04 Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service{1202}
1983/04/04 New Gasket Prevents Leakage{1201,1362,1380}
1983/04/04 Labyrinth-Type Seal Ring Available For Rear Power Takeoff{3055}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.