Tire and Rim - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 6V-9061     | Pump     | 1     |
8S-7645 | Hose Group     | 1     | |
9U-7536 | Lift Stand     | 1     | |
B     | 8S-7640     | Stand     | 2     |
8S-7621 | Tube     | 2     | |
4C-6562 | Pin Assembly     | 2     | |
C     | 5P-9694     | Ratchet Hoist     | 1     |
- Park the machine on a hard, level surface. Lower the scraper bowl to the ground and engage the parking brake. Chock the wheels in order to prevent the machine from moving.
- Place Tooling (A) under the scraper bowl, as shown.
Show/hide table
Illustration 1 | g00494597 |
- Use Tooling (A) to raise the rear of the scraper bowl. Install Tooling (B) in order to support the scraper bowl.
Show/hide table
Illustration 2 | g00494598 |
- Remove 18 nuts (1) from rim (2) . Leave two nuts on the rim in order to hold the tire and rim on the machine.
Show/hide table
Illustration 3 | g00494599 |
- Attach Tooling (C) and a lift truck to tire (3) . Remove the two nuts from the rim. Remove tire (3) from the machine. The tire weighs 675 kg (1500 lb) .
Show/hide table
Illustration 4 | g00494620 |
Caterpillar Information System:
994D Wheel Loader Power Train General Information
D8R Track-Type Tractor Ether Starting Aid
Payload Control System Keypad Modes and Functions
994D Wheel Loader Cab Air Filter - Clean/Replace
Payload Control System Normal Weighing Mode
615C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Install
627F Wheel Tractor-Scraper Windows - Clean
615C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Remove
Payload Control System System Calibration
615C Series II Wheel Tractor-Scraper Machine Systems Vane Motor (Elevator) - Assemble
631E Series II Wheel Tractor-Scrapers Hydraulic Oil Cooler - Clean - Auger
Installation Procedure Of The HEUI Pump Compensator Standby Plug For 3408E And 3412E Engines{1714} Installation Procedure Of The HEUI Pump Compensator Standby Plug For 3408E And 3412E Engines{1714}
D8R Track-Type Tractor Engine Start Switch
966G and 972G Wheel Loaders Power Train Axle Housing - Disassemble
994D Wheel Loader Circuit Breakers - Reset
615C Series II Wheel Tractor-Scraper Machine Systems Tire and Rim - Install
D8R Track-Type Tractor Heating and Air Conditioning Control
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Kickout System - Pilot Hydraulic System
994D Wheel Loader Cooling System Coolant (ELC) - Change
902 and 906 Compact Wheel Loaders Braking System Brake Rotor
994D Wheel Loader Cooling System Coolant Extender (ELC) - Add
994D Wheel Loader Steering System Piston Pump (Steering)
Payload Control System Payload Control System/PC Off-Board System
966G Wheel Loader and 972G Wheel Loader Machine Systems Steering Control Valve - Disassemble