Ether Starting Aid Cylinder - Replace
The ether starting aid cylinder is mounted on the right side of the engine compartment. The ether cylinder is ahead of the engine access door.
Show/hide table
| |
| Illustration 1 | g00421358 |
|
The ether cylinder is not shown in the illustration. | |
- Remove the 2 bolts (1) that hold the access door closed. Open the access cover for the ether cylinder.
- Loosen the ether cylinder retaining clamp (2). Unscrew the ether cylinder.
- Remove the used gasket (3). Install the new gasket. A new gasket is provided with each new ether cylinder.
- Install the new ether cylinder. Tighten the ether cylinder hand tight. Tighten the cylinder retaining clamp with your fingers.
- Close the access cover. Install the bolts for the cover.
Caterpillar Information System:
938G Wheel Loader and IT38G Integrated Toolcarrier Fire Extinguisher Location
D6G Track-Type Tractor Power Train Final Drive Pinion and Flange - Remove
992G Wheel Loader Machine Systems Boom - Install
966G Wheel Loader and 972G Wheel Loader Power Train Drive Shaft
D6G Track-Type Tractor Power Train Sprocket Shaft - Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Crankshaft
D6G Track-Type Tractor Power Train Sprocket Shaft - Remove
992G Wheel Loader Machine Systems Boom - Remove
994D Wheel Loader Secondary Steering
615C Series II Wheel Tractor-Scraper Machine Systems Diverter Valve (Elevator) - Disassemble
966G Wheel Loader and 972G Wheel Loader Power Train Engine and Transmission Mounting
994D Wheel Loader Power Train Speed Sensor (Transmission Output)
D6G Track-Type Tractor Power Train Final Drive Pinion and Flange - Install
966G Wheel Loader and 972G Wheel Loader Machine Systems Vane Pump (Implement) - Remove
637E Series II Wheel Tractor-Scrapers Ether Starting Aid Cylinder - Replace
3512 Industrial Engine Fuel System - Prime
3176C and 3196 Engines for Caterpillar Built Machines Lubrication System
966G Wheel Loader and 972G Wheel Loader Machine Systems Vane Pump (Implement) - Install
994D Wheel Loader Power Train Selector and Pressure Control Valve (Transmission)
966G Wheel Loader and 972G Wheel Loader Power Train Bevel Gear and Pinion (Fixed Axle)
613C Series II Wheel Tractor-Scraper Machine Systems Brake Lining - Remove
613C Series II Wheel Tractor-Scraper Machine Systems Brake Lining - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Steering Frame Lock - Separate and Connect
966G Wheel Loader and 972G Wheel Loader Machine Systems Vane Pump (Implement) - Disassemble