Metering Pump (Steering) - Disassemble
Start By:
- Remove the steering metering pump. Refer to Disassembly and Assembly, "Metering Pump (Steering) - Remove".
Note: Thoroughly clean the outside of the steering metering pump prior to disassembly.
- Remove seven bolts (1) and cap (2) from the gerotor assembly.
Show/hide table
Illustration 2 g00278607 - Remove O-ring seal (3) from cap (2).
Show/hide table
Illustration 3 g00278608 - Remove gerotor assembly (4) and spacer (5) from the pump body.
Show/hide table
Illustration 4 g00278609 - Remove O-ring seal (6) from gerotor assembly (4).
Show/hide table
Illustration 5 g00278612 - Remove drive (7) and spacer (8) from the pump body.
Show/hide table
Illustration 6 g00278613 - Remove O-ring seal (9) from the pump body.
- Remove sleeve assembly (10) from the pump body.
Show/hide table
Illustration 7 g00278614 - Disassemble the sleeve assembly.
- Remove pin (14).
- Remove spool (12) from sleeve (11).
- Remove six springs (13) from spool (12).
Show/hide tableIllustration 8 g00278615 - Remove bearing races (15) and bearing (16) from the pump body.
Show/hide table
Illustration 9 g00278616 Show/hide tableIllustration 10 g00278657 - Turn the pump body onto the opposite side. Remove spiral lockring (17), bushing (18) and O-ring seal (19).
Show/hide table
Illustration 11 g00278658 - Remove seals (20) from bushing (21).
Show/hide table
Illustration 12 g00842687 - Remove plug (22), seat (24), ball (26) and retainer (27) from the pump body.
- Remove O-ring seals (23) and (25) from seat (24).
Show/hide table
Illustration 1 | g00278434 |
Caterpillar Information System:
902 and 906 Compact Wheel Loaders Pallet Forks Operation
902 and 906 Compact Wheel Loaders Cab Door
3408E and 3412E Engines for Caterpillar Built Machines Crankcase Breather
966G Wheel Loader and 972G Wheel Loader Machine Systems Heater Coil - Remove and Install
966G Wheel Loader and 972G Wheel Loader Engine Supplement Hood Tilt Actuator - Remove
990 and 990 Series II Wheel Loader and 844 Wheel Tractor Power Train Differential and Bevel Gear
966G Wheel Loader and 972G Wheel Loader Machine Systems Evaporator Coil - Remove and Install
953C Track-Type Loader Power Train Speed Control (Override and Brake)
902 and 906 Wheel Loaders Piston Motor (Hydrostatic)
966G Wheel Loader and 972G Wheel Loader Machine Systems Seat - Remove and Install
854G Wheel Dozer Hydraulic System Hydraulic Oil Contamination - Test
994D Wheel Loader Hydraulic System Screen (Implement Pump)
966G Wheel Loader and 972G Wheel Loader Machine Systems Metering Pump (Steering) - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Steering Wheel - Remove and Install
994D Wheel Loader Hydraulic System Temperature Sensor (Hydraulic Tank)
3408E and 3412E Engines for Caterpillar Built Machines Housing (Front)
994D Wheel Loader Hydraulic System Tilt Cylinder
854G Wheel Dozer Hydraulic System Relief Valve (Pilot)
953C Track-Type Loader Power Train Screen Group
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System Steering Control Valve - Command Control Steering
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Orifice Tube System
953C Track-Type Loader Hydraulic System Diverter Valve
953C Track-Type Loader Hydraulic System Bucket Control
953C Track-Type Loader Power Train Hydraulic Oil Filter