Fuel Transfer Pump - Install
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
 | |
| Illustration 1 | g01175567 |
- Position fuel transfer pump (1) and the gasket on the front housing cover.
- Install bolts (2) .
- Connect tube assembly (3) .
Caterpillar Information System:
C-10 Petroleum Engine Fuel Transfer Pump - Remove
C-10 Petroleum Engine Fuel Filter Base - Install
C-10 Petroleum Engine Fuel Filter Base - Remove
G3516B Engines MID 036 - CID 1446 - FMI 09 Unable to communicate with Fuel Metering Module
G3516B Engines MID 036 - CID 1446 - FMI 09 Unable to communicate with Fuel Metering Module
G3516B Engines MID 036 - CID 1446 - FMI 05 Fuel Metering Module open circuit
C-10 Petroleum Engine Fuel Priming Pump - Remove and Install
G3516B Engines MID 036 - CID 1446 - FMI 05 Fuel Metering Module open circuit
C15 Petroleum Generator Set Engines Pinion Clearance - Adjust
C15 On-highway Engine Cylinder Head Valves
C15 On-highway Engines Turbocharger - Install - High Pressure
C15 On-highway Engines Turbocharger - Remove - High Pressure
C-10 Petroleum Engine Electronic Unit Injector - Remove
C-10 Petroleum Engine Electronic Unit Injector - Install
C9 Marine Generator Set Engines Engine Valve Lash - Inspect/Adjust
C15 On-highway Engines Exhaust Manifold - Remove and Install
C-10 Petroleum Engine Fuel Manifold - Remove
C-10 Petroleum Engine Fuel Manifold - Install
C27 and C32 Engines for Caterpillar Built Machines CID 0094 FMI 03 Fuel Pressure open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines CID 0094 FMI 04 Fuel Pressure short to ground
C27 and C32 Engines for Caterpillar Built Machines CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines CID 0100 FMI 04 Engine Oil Pressure short to ground
C-10 Petroleum Engine Electronic Unit Injector Sleeve - Remove
C11 and C13 Engines for Caterpillar Built Machines CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt