Equalizer Bar Pins - Lubricate
Show/hide table
| NOTICE |
|---|
Apply lubricant to the fittings with a hand operated grease gun only. Use of pressure operated lubricating equipment damages the seals. |
Show/hide table
 | |
| Illustration 1 | g00102954 |
Show/hide table
 | |
| Illustration 2 | g00102036 |
- Remove the plug. Install a grease fitting.
- Lubricate the fitting.
- Remove the grease fitting. Install the plug.
- Lubricate the end fittings.
Caterpillar Information System:
D5M Track-Type Tractor Equalizer Bar Pins - Inspect
992G Wheel Loader and 854G Wheel Dozer Braking System Brake Control Valve (Parking)
D5M Track-Type Tractor Equalizer Bar Center Pin - Lubricate
992G Wheel Loader and 854G Wheel Dozer Power Train Fixed Axle (Front)
651E Wheel Tractor-Scraper Radiator Core - Clean
D5M Track-Type Tractor Engine Oil and Filter - Change
D5M Track-Type Tractor Engine Oil Level - Check
631E Series II Wheel Tractor-Scrapers Warranty Information
D5M Track-Type Tractor Engine Air Precleaner - Clean
992G Wheel Loader and 854G Wheel Dozer Power Train Input Drive Shaft
D6M Track-Type Tractor Power Train Torque Converter
D5M Track-Type Tractor Engine Air Filter Secondary Element - Replace
D5M Track-Type Tractor Ether Starting Aid Cylinder - Replace
D6M Track-Type Tractor Power Train Transmission - Power Shift
D5M Track-Type Tractor Fuel Tank Water and Sediment - Drain
651E Wheel Tractor-Scraper Router Bits - Inspect/Replace
D6R Track-Type Tractor Crushing Prevention and Cutting Prevention
D6R Track-Type Tractor Fire Prevention and Explosion Prevention
D6M Track-Type Tractor Bulldozer Blade Tilt and Angle Control
992G Wheel Loader and 854G Wheel Dozer Power Train Oscillating Axle (Rear)
3208 Marine Engine Crushing Prevention and Cutting Prevention
D5M Track-Type Tractor Engine Start Switch
3208 Marine Engine Engine Starting
631E Series II Wheel Tractor-Scrapers Seat - Inspect