C11 and C13 Petroleum Engines Caterpillar


Plate Locations and Film Locations

Usage:

C13 A5K


Ilustrace 1g01247995

Motory Caterpillar jsou označeny výrobními čísly a čísly provedení. Tato čísla jsou uvedena na sériovém štítku motoru a na informačním štítku motoru. Prodejci společnosti Caterpillar musí znát tato čísla, aby mohli určit přesně typy součástí, které motor obsahuje. To umožňuje přesnou identifikaci objednacích čísel náhradních dílů.

Štítek s výrobním číslem (1)

Štítek s výrobním číslem motoru je umístěný na pravé zadní straně bloku motoru.

Výrobní číslo motoru ____________________

Typ motoru ____________________

Číslo provedení ____________________

Informační štítek (2)

Informační štítek motoru je umístěný na sacím potrubí v blízkosti pravé přední části motoru.

Výrobní číslo motoru ____________________

Číslo aranžmá motoru ____________________

Číslo modifikace motoru ____________________

Na štítku motoru jsou uvedeny další důležité informace o motoru.

Caterpillar Information System:

12M Motor Grader Blade Lift Cylinder Socket - Check/Adjust/Replace
12M Motor Grader Blade Lift Cylinder Socket - Lubricate
12M Motor Grader Backup Alarm - Test
C15 Petroleum Engines Housing (Front) - Install
C15 Petroleum Engines Housing (Front) - Remove
C15 Industrial Engines Plate Locations and Film Locations
C15 Industrial Engines Model View Illustrations
3406E and 3456 Generator Set Engines Electrical Power Supply Circuit - Test
C15 Industrial Engines Safety Messages
Product Link - PL102C Operating Hours Discrepancy
3406E and 3456 Generator Set Engines Engine Control Switch (ECS) (EMCP II)
2004/04/01 A New Special Instruction, REHS1531, "Oxidation Catalyst Converter for Stationary Engines" is Available {1091}
C15 Engine Reference Material
Product Link - PL102C Reports and Messages Not Available
3406E and 3456 Generator Set Engines Air Shutoff System - Test
3508, 3512, and 3516 Generator Sets Refill Capacities and Recommendations
Machining of The Cylinder Block to Convert from Wet Cylinder Liners to Dry Cylinders Liners{1201} Machining of The Cylinder Block to Convert from Wet Cylinder Liners to Dry Cylinders Liners{1201}
C15 Petroleum Engines Pump Drive - Remove
C15 Petroleum Engines Pump Drive - Install
3406E and 3456 Generator Set Engines Emergency Stop Switch Circuit - Test
C15 and C18 Generator Set Engines Atmospheric Pressure Sensor - Remove and Install
C15 and C18 Generator Set Engines Engine Oil Pressure Sensor - Remove and Install
3406E and 3456 Generator Set Engines ATA (SAE J1587 / J1708) Data Link Circuit - Test
C15 and C18 Industrial Engines Coolant Temperature Sensor - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.