Blade Lift Cylinder Socket - Lubricate
Megjegyzés A Caterpillar 5%-os molibdén kenőanyag használatát javasolja a tolólap emelőhenger-aljzatainak kenéséhez. További információ a molibdén kenőanyagról: Különleges kiadvány, S2BU6250, "Ajánlások a Caterpillar gépekben használandó folyadékokhoz".
Töröljön le minden csatlakozót, mielőtt kenőanyagot visz fel a csatlakozókon keresztül.
Show/hide table
| |
| Illusztráció 1 | g01071490 |
A tolólapnak két emelőhenger-aljzata van. A tolólap mindkét emelőhenger-aljzata egy-egy csatlakozóval van ellátva.
Vigyen fel megfelelő kenőanyagot a csatlakozón (1) keresztül a tolólap emelőhenger-aljzatainak kenéséhez.
Caterpillar Information System:
12M Motor Grader Backup Alarm - Test
C15 Petroleum Engines Housing (Front) - Install
C15 Petroleum Engines Housing (Front) - Remove
C15 Industrial Engines Plate Locations and Film Locations
C15 Industrial Engines Model View Illustrations
3406E and 3456 Generator Set Engines Electrical Power Supply Circuit - Test
C15 Industrial Engines Safety Messages
Product Link - PL102C Operating Hours Discrepancy
3406E and 3456 Generator Set Engines Engine Control Switch (ECS) (EMCP II)
2004/04/01 A New Special Instruction, REHS1531, "Oxidation Catalyst Converter for Stationary Engines" is Available {1091}
3126B Petroleum Engine Injection Actuation Pressure Sensor - Test
2004/09/06 Correction to Service Magazine "Hydraulically Fractured Connecting Rods are Now In Production" {1218}
12M Motor Grader Blade Lift Cylinder Socket - Check/Adjust/Replace
C11 and C13 Petroleum Engines Plate Locations and Film Locations
C15 Engine Reference Material
Product Link - PL102C Reports and Messages Not Available
3406E and 3456 Generator Set Engines Air Shutoff System - Test
3508, 3512, and 3516 Generator Sets Refill Capacities and Recommendations
Machining of The Cylinder Block to Convert from Wet Cylinder Liners to Dry Cylinders Liners{1201} Machining of The Cylinder Block to Convert from Wet Cylinder Liners to Dry Cylinders Liners{1201}
C15 Petroleum Engines Pump Drive - Remove
C15 Petroleum Engines Pump Drive - Install
3406E and 3456 Generator Set Engines Emergency Stop Switch Circuit - Test
C15 and C18 Generator Set Engines Atmospheric Pressure Sensor - Remove and Install
C15 and C18 Generator Set Engines Engine Oil Pressure Sensor - Remove and Install