Usage:
12F ( 73G, 59H, 73H, 89H, 13K, 33K, 34K ),
12G ( 61M ),
14C ( 35F ),
14D ( 96F ),
14E ( 72G, 99G, 78H, 12K, 40K ),
14G ( 3L, 96U ),
16 ( 49G ),
16G ( 93U ),
112 ( 68E ),
112E ( 91G, 24H, 72H ),
112F ( 46D, 82F, 25H, 74H ),
120 ( 89G, 26H, 60H, 14K, 35K, 36K, 21R, 13U ),
120G ( 82V, 87V, 11W, 61W ),
130G ( 7GB, 59K ),
140 ( 14U ),
140G ( 50H, 72V, 81V, 13W ),
215 ( 61Z ),
225 ( 20S, 51U, 76U, 61X ),
227 ( 10W ),
235 ( 32K, 64R, 62X, 81X, 83X ),
245 ( 94L, 95V ),
518 ( 50S, 55U, 94U, 95U ),
621B ( 2DB ),
814 ( 90P, 14R ),
815 ( 91P, 15R ),
816 ( 57U ),
824B ( 36H ),
825B ( 43N ),
826B ( 58U ),
834 ( 43E ),
834B ( 92Z ),
835 ( 44N ),
941, 941B ( 70H, 80H, 16U ),
950 ( 90A, 99A, 58H, 15J, 43J, 81J, 31K, 18R, 96S, 49U ),
951B, 951C ( 32F, 69H, 86J ),
955K, 955L ( 57J, 64J, 71J, 85J ),
966B ( 75A, 57H ),
966C ( 75F, 78G, 42J, 76J, 30K, 25U ),
980B ( 89P ),
988 ( 87A ),
988B ( 50W, 62Y ),
992C ( 49Z ),
D4D ( 97F, 44H, 47H, 49J, 59J, 60J, 61J, 65J, 66J, 82J, 83J, 84J, 69K, 74U)
Reference: Service Manual
The 6T9254 Resistor Hardware Kit replaces the former resistor on the above machines. The kit includes a new bracket and a new resistor that operates at a cooler temperature. To install the resistor hardware kit, see the instructions that follow along with the Service Manual.
1 Follow the procedure in the Service Manual to gain access to the fan motors.
2 Cut the three wires, connected to resistor (1), 50.0 mm (2.00") from the resistor. Remove bolt (2) and the resistor. Retain the bolt.
NOTE: Be sure to put identification on the wires to ensure correct installation of the new resistor.
3 Install new resistor assembly (3) with former bolt (2). Tighte bolt (2) and bolt (4) to a torque of 12.0 ± 4.0 N·m (9.0 ± 3.0 lb-ft). Remove insulation from the motor wire and the switch wires as required to permit installation of new terminal connectors. Connect the wires to the respective wires of resistor assembly (3).
4 Check the operation of the motor. Install parts removed to gain access to the motors; see the Service Manual.