1982/10/04 Caterpillar


Service Management Guide And Service Methods And Equipment Guide Canceled{0374}

Usage:


The Service Management Guide, Form SEBF3020, and the Service Methods and Equipment Guide, Form SEBF2000, have been discontinued. No further orders will be accepted or updates issued for these two publications. New guides, more in keeping with modern service and management techniques, are available. The Engine and Component Reconditioning Guide and Undercarriage Reconditioning Guide, offer more current information covering procedures, personnel, equipment and tools to fit today's age of specialization. SMCS Code Structure Information, which is currently included in the Service Management Guide will continue to be updated and distributed with the Service Information Retrieval System (SIRS).

Caterpillar Information System:

1982/10/04 Changes To Direct Inquiry SIRS{0374}
1982/09/27 Electrical System Voltage Must Be Limited To A Maximum Of 40 Volts With Woodward Model 2301 Governors{1289}
1982/09/27 Improvement To Engine Overspeed Alarm System{7410,7418}
1982/09/27 New Thrust Discs Used In Planetary Groups, Winch Groups{3187,5165,3176}
1982/09/27 New Head Gasket Improves Seal Between Block And Liner Flange{1101,1201}
1982/09/27 New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27 Metal Particles On Magnetic Pick-Up Can Permit Engine RPM To Vary; Move Pick-Up To A New Location{1289}
1982/09/27 Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/20 New Sleeve Used In BrakeSaver To Decrease Oil Pressure In Lip Seal Area{1155}
1982/09/20 Induction Bearing Heater Available{0627}
1982/09/20 Dial Bore Gauge And Size Setting Fixture Available{0653}
1982/09/20 Filler Cap Locks Prevent Vandalism (Damage) To Fluid Compartments{1273,1316,1382,3177,5056}
1982/10/04 Planned Engine Repairs{0374,0375,1318,0372}
1982/10/04 New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04 Improvements Made To Marine Transmissions{3300}
1982/10/04 New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04 New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/11 Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11 Indications From 6V3100 Timing Indicator Group Must Be Corrected For Some Applications{0651,1250,1156,1157}
1982/10/11 Field Conversion Procedure For EPA Certified On-Highway Truck And On-Highway Vehicle Engines{0374,0375,7557,1250}
1982/10/11 Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11 Altronic III Ignition Systems Available{1560}
1982/10/11 Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1982/10/11 New Fasteners Used For Fuel Injection Lines{1252}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.