Engine Oil Temperature Sensor - If Equipped
Show/hide table
| 图 1 | g01516494 |
(1) 温度传感器总成的最终安装扭矩 ... 20 ± 5 N·m (177 ± 44 lb in)
工作温度 ... −40 to 120 °C (−40 to 248 °F)
输出类型 ... PWM（脉冲宽度调制）
Caterpillar Information System:
C9 On-Highway Truck Engines Modulating Valve - Remove and Install
Center Steering Arm Straight Bore Inspection and Salvage Procedure for Off-Highway Trucks {4305} Center Steering Arm Straight Bore Inspection and Salvage Procedure for Off-Highway Trucks {4305}
C7 On-Highway Engine Modulating Valve - Remove and Install
C13, C15, and C18 Generator Set Engines Injector Solenoid Circuit - Test
3412E Engine for Caterpillar Built Machines Replacing the ECM
C-10 Petroleum Engine Reference Material
C13, C15, and C18 Generator Set Engines Engine Temperature Sensor Open or Short Circuit - Test
C-10 Petroleum Engine Refill Capacities and Recommendations
3500B and 3500C Marine Engines Fuel Ratio Control
3500B and 3500C Marine Engines Output for the General System Alarm
3412E Engine for Caterpillar Built Machines CID 0190 FMI 08 Engine Speed abnormal
3500B and 3500C Marine Engines Protection Override Switch
C-15 Petroleum Engine Turbocharger
C15 and C18 Petrolem Generator Set Engines Switch Circuits - Test
3412E Petroleum Engine System Configuration Parameters
G3300 Engines Gas Pressure Regulator - Check
C13, C15, and C18 Generator Set Engines Ether Injection System - Test
G3600 Engines Crankshaft Vibration Damper - Inspect
3126B Petroleum Engine Engine Crankcase Pressure (Blowby) - Test
C18 Generator set and C18 Marine Engines Fuel Transfer Pump - Remove
C18 Generator set and C18 Marine Engines Fuel Transfer Pump - Install
3126B Petroleum Engine Belt Tension Chart
G3300 Engines Engine - Clean
G3520C and G3520E Engines Thermostatic Valve