1982/08/30 Caterpillar


Make Sure Generator Leads Do Not Move Against Frame{4459}

Usage:


All Brushless SR-4 Generators

The main output leads (wires) on generators are in a loose condition when the generator is sent from the factory. These leads must be separated and put in the correct position during installation of the generator by the serviceman. After installation of the leads, the serviceman must make sure these leads are held in place so they do not move against the frame. Movement against the frame can wear away the insulation on the leads. This can cause an electrical short and damage the generator leads.

If desired rubber hose can be put around the opening in the frame to prevent this problem. Make sure there is no metal reinforcement in the hose.

Caterpillar Information System:

1982/08/30 Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30 Change Made To Installation Procedure For 3N5620 Service Disconnect Spacer Group{0374,1000}
1982/08/30 New Rear Support For Oil Cooler Is Thicker, Has Cast-In Spacers{1378}
1982/08/23 New Time Delay Conversion Groups Available{7400}
1982/08/23 Service Life Of Slip Rings Can Be Extended{4464}
1982/08/23 New Lines Group For Water Cooled Turbocharger{1052,1307,1380}
1982/08/23 Repair Kit For The 5P9700 Hose Cutter Is Available{0623,1380}
1982/08/23 New Mechanical Switches Are Available For Parts Service{7332,1400}
1982/08/23 New Thrust Washer Can Prevent Wrong Oil Sample Readings{1102}
1982/08/16 New Gauges Used In Instrument Panel{7450,7453,7455}
1982/08/16 Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16 Improved Gasket Available For Engine Oil And BrakeSaver Oil Cooler{1350,1155}
1982/09/06 Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06 New Brass Bonnet, Bonnet Assembly Used In Heat Exchanger{1379}
1982/09/06 Improved Inlet And Exhaust Valves{1105}
1982/09/06 Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06 New Instruction Card Available For 6V87 Valve Stem Gauge{0653}
1982/09/13 New Bearing Used In Air Starting Motor {1451}
1982/09/13 New Seal Rings Used In BrakeSavers {1155}
1982/09/13 Two Oil Change Kits Have Oil Filters, Cooling System Conditioner {1318,1350}
1982/09/13 New Water Pumps Use New Seal And Impeller {1361}
1982/09/13 Caterpillar-Built Industrial Engines Available In New Machines {0371,1000}
1982/09/13 New Rocker Arm Assemblies Used {1102}
1982/09/13 Seat Belt Hook Fasteners {7327}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.