New Mechanical Switches Are Available For Parts Service{7332,1400}
Usage:
Several new mechanical switches are now available for parts service. These switches can be used in miscellaneous applications on all machines. They have plunger, roller, or knob type actuators.
The new switches are shown in the chart. A 19.05 mm (.750") diameter mounting hole is needed for the installation of these switches.
Illustration 1. Dimensions for 3T2357, 3T3453, and 3T3947 Switches.
Caterpillar Information System:
1982/08/23 New Thrust Washer Can Prevent Wrong Oil Sample Readings{1102}
1982/08/16 New Gauges Used In Instrument Panel{7450,7453,7455}
1982/08/16 Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16 Improved Gasket Available For Engine Oil And BrakeSaver Oil Cooler{1350,1155}
1982/08/16 New Serial Numbers For 3208 Truck Engines{0375}
1982/08/16 New Compression Ring Available For Control Of Excessive Oil Consumption{1215}
1982/08/16 Fuel Line Hoses Can Be Damaged In Locations Between Engine And Vehicle Components{1274}
1982/08/16 New Hardened Gears Used In Engine Camshaft Assemblies And Accessory Drives{1207,1212}
1982/08/16 Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/09 New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09 New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09 New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure{1254}
1982/08/23 Repair Kit For The 5P9700 Hose Cutter Is Available{0623,1380}
1982/08/23 New Lines Group For Water Cooled Turbocharger{1052,1307,1380}
1982/08/23 Service Life Of Slip Rings Can Be Extended{4464}
1982/08/23 New Time Delay Conversion Groups Available{7400}
1982/08/30 New Rear Support For Oil Cooler Is Thicker, Has Cast-In Spacers{1378}
1982/08/30 Change Made To Installation Procedure For 3N5620 Service Disconnect Spacer Group{0374,1000}
1982/08/30 Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30 Make Sure Generator Leads Do Not Move Against Frame{4459}
1982/09/06 Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06 New Brass Bonnet, Bonnet Assembly Used In Heat Exchanger{1379}
1982/09/06 Improved Inlet And Exhaust Valves{1105}
1982/09/06 Reusability Of Camshaft Rollers And Roller Followers{1209,1210}