1982/08/23 Caterpillar


New Lines Group For Water Cooled Turbocharger{1052,1307,1380}

Usage:


3306 Natural Gas Engines

Reference: "Water Cooled Turbocharger Now Used" in the July 5, 1982, Service Magazine, on pages 2 and 3. This article tells about the release of a new turbocharger group and two new lines groups.

Some more information about the installation of this turbocharger group is now available. Also, a correction must be made to the last sentence of the earlier article. Change the last sentence to read as follows: "The tee and tube assembly are needed to connect a water line from the rear of the exhaust manifold to the turbocharger."

The 8N6811 Caution Tag, which is part of the water lines group has the "Notice" which follows:

"Vent line must be added from manifold to higher point in cooling system external of the engine. Failure to add or properly install vent line may result in cylinder head or manifold failure."

A new water lines group, which has this vent line, is now available. This group has all the parts needed to install the vent line on 3306 Natural Gas Engines equipped with a radiator supplied (from) by Caterpillar Tractor Co.

The new 2W829 Water Lines Group is adaptable to all engines with a radiator supplied by Caterpillar. For engines equipped with a radiator supplied by another manufacturer, a similar vent system must be used.

Caterpillar Information System:

1982/08/23 Repair Kit For The 5P9700 Hose Cutter Is Available{0623,1380}
1982/08/23 New Mechanical Switches Are Available For Parts Service{7332,1400}
1982/08/23 New Thrust Washer Can Prevent Wrong Oil Sample Readings{1102}
1982/08/16 New Gauges Used In Instrument Panel{7450,7453,7455}
1982/08/16 Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16 Improved Gasket Available For Engine Oil And BrakeSaver Oil Cooler{1350,1155}
1982/08/16 New Serial Numbers For 3208 Truck Engines{0375}
1982/08/16 New Compression Ring Available For Control Of Excessive Oil Consumption{1215}
1982/08/16 Fuel Line Hoses Can Be Damaged In Locations Between Engine And Vehicle Components{1274}
1982/08/16 New Hardened Gears Used In Engine Camshaft Assemblies And Accessory Drives{1207,1212}
1982/08/16 Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/09 New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/23 Service Life Of Slip Rings Can Be Extended{4464}
1982/08/23 New Time Delay Conversion Groups Available{7400}
1982/08/30 New Rear Support For Oil Cooler Is Thicker, Has Cast-In Spacers{1378}
1982/08/30 Change Made To Installation Procedure For 3N5620 Service Disconnect Spacer Group{0374,1000}
1982/08/30 Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30 Make Sure Generator Leads Do Not Move Against Frame{4459}
1982/09/06 Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06 New Brass Bonnet, Bonnet Assembly Used In Heat Exchanger{1379}
1982/09/06 Improved Inlet And Exhaust Valves{1105}
1982/09/06 Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06 New Instruction Card Available For 6V87 Valve Stem Gauge{0653}
1982/09/13 New Bearing Used In Air Starting Motor {1451}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.